Cel
The pilot facility AT-1 for the reprocessing of FBR-fuel had a capacity of 2 kg/day and had been operated from 1969 to 1979. Dismantling of the plant has started and is planned to be completed by 1992.
Considering that the experience to be gained from the dismantling of the first representative nuclear installations in the Community should be made available to all Member States, the Commission selected AT-1 as a pilot dismantling project for the 1989-93 R&D programme on the decommissioning of nuclear installations. The Commission, through shared-cost participation in specific parts of the project, intends promoting the use of advanced techniques and the performance of collateral investigations, in order to enhance the generation of useful knowledge and experience to serve in subsequent decommissioning tasks. In particular, the generation of specific data on costs, working hours and job doses as well as on the amount of created secondary waste is considered as an important objective of this project.
The dismantling of the AT-1 facility is concerned by specific problems associated to the reprocessing of irradiated fuel, namely the presence of a mixture of alpha, beta and gamma emitters. This necessitates the use of remotely operated and controlled equipment for the dismantling and decontamination, partly due to the specific conception of the cells, without direct viewing. For this, the carrier ATENA is used (telescope plus polyarticulated arm) supporting the telemanipulators MA 23 or RD 500.
Specific problems are also encountered with radioactive measurements needed for the sorting and preconditioning of the arising dismantling waste.
The contract started with Phase 1 work involving the dismantling and waste assaying and conditioning of cells 903, 904, 905 and the dismantling of fission product storage cells. The subsequent Phase 2-work is devoted to the remote dismantling of a concrete wall and to the decontamination of the concrete walls and floors in the dismantled cells.
Estimated maximal values for the specific contamination and for dose rates are in the order of 10,000 Bq/square cm and 1 Gy/h, respectively.
The dismantling of the AT-1 facility is concerned with specific problems associated with the reprocessing of irradiated fuel, namely the presence of a mixture of alpha, beta and gamma emitters. This necessitates the use of remotely operated and controlled equipment for the dismantling and decontamination, without direct viewing.
The contract started with phase 1 work involving the dismantling and waste assaying and conditioning of cells 903, 904, 905 and the dismantling of fission product storage cells. The subsequent phase 2 work is devoted to the remote dismantling of a concrete wall and to the decontamination of the concrete walls and floors in the dismantled cells.
The dismantling of the high activity cells has almost been totally completed using the ATENA machine. To enter cell 903 (dissolution cell), it was necessary to make an access through the concrete wall separating cell 903 from cell 904. This operation was remotely carried out with the ATENA machine equipped with a diamond tipped saw. The cell used for the conditioning of waste was put into service and used to remove almost half of the waste bulk from cell 904. After 2 years of operation, the experience gained with the remote equipment, used to dismantle the high activity cells of AT-1 and to remove waste, was investigated.
WORK PROGRAMME
1. Remote-operated dismantling of equipment out of the strongly contaminated cell 903 (used for dissolution), and of cells 904 and 905 (used for extraction).
2. Measurement of the radioactivity and conditioning of the waste arising from 1.
3. Dismantling of tanks for the storage of fission products.
4. Generation of specific data on costs, radioactive job doses, working time and secondary waste arisings, derived from the execution of items 1, 2, 3, 5 and 6.
5. Remote dismantling of a reinforced concrete wall
6. Semi-automatic decontamination and contamination measurements of concrete walls and floors
Dziedzina nauki (EuroSciVoc)
Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: Europejski Słownik Naukowy.
Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: Europejski Słownik Naukowy.
- nauki przyrodnicze nauki fizyczne fizyka jądrowa rozszczepienie jądra
- inżynieria i technologia inżynieria śodowiska energetyka i paliwa
Aby użyć tej funkcji, musisz się zalogować lub zarejestrować
Przepraszamy… podczas wykonywania operacji wystąpił nieoczekiwany błąd.
Wymagane uwierzytelnienie. Powodem może być wygaśnięcie sesji.
Dziękujemy za przesłanie opinii. Wkrótce otrzymasz wiadomość e-mail z potwierdzeniem zgłoszenia. W przypadku wybrania opcji otrzymywania powiadomień o statusie zgłoszenia, skontaktujemy się również gdy status ulegnie zmianie.
Program(-y)
Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.
Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.
Temat(-y)
Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.
Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.
Zaproszenie do składania wniosków
Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.
Brak dostępnych danych
Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.
System finansowania
Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.
Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.
Koordynator
75015 PARIS
Francja
Ogół kosztów poniesionych przez organizację w związku z uczestnictwem w projekcie. Obejmuje koszty bezpośrednie i pośrednie. Kwota stanowi część całkowitego budżetu projektu.