Cel
TAMES-2 addresses the problem of industrial testability of mixed signal interface macrocells containing data converters embedded in SoC. To focus on the main industrial requirements, e.g. improving the test quality while reducing test costs, a reusable DfT methodology will be defined, by introducing the key concepts of test reuse at SoC, architectural and circuit level. Innovative DfT techniques will be implemented in two IP blocks that have complementary test challenges. The methodology will be validated through the design of testchips containing the IP blocks. A rating methodology will be applied during testchips characterization to check the objectives achievement. Exploitation within TAMES-2 will be biased towards marketing the IP blocks embedding advanced DfT solutions, towards the dissemination through international conferences and academic courses, and the submission of the results to standardisation organisations.
Objectives:
The objective of the TAMES-2 project is to improve the industrial testability of high-resolution analogue to digital interfaces embedded in SoC (System-on-Chip).
The work will respond to three key industrial demands:
- Test cost reduction through minimisation of test time and test development cost;
- Improvements in test coverage and outgoing quality, to address the industrial trend for higher quality product at lower cost;
- development of test reuse concepts and integration of the associated advances in test engineering into the design flow for new interface designs in SoC applications.
TAMES-2 will improve mixed-signal test engineering as it will characterise test solutions at the SoC, architectural and circuit levels, develop reusable test solutions in the mixed signal domain, and push the sate-of-the-art in high-resolution embedded converters.
Work description:
TAMES-2 will be carried out by four partners, two industrial Companies and two academic organisations :
- Alcatel Microelectronics;
- Dolphin Integration;
- Lancaster University and
- IMSE-CNM.
Each Partner brings to the consortium the necessary and sufficient expertise and knowledge to achieve the objectives of the project. The work to be carried out to achieve the advances proposed in converter test engineering will be driven by the requirements of the industrial users in the consortium.
The main steps of the TAMES-2 project are:
- Study of the requirements for industrial mixed-signal test;
- Definition of suitable innovative DfT Techniques, including BIST at SoC, architectural and circuit level;
- Validation of the objectives of the project through the design of industrial IP blocks, an audio codec and an auto-motive interface, both representing macrocells for use in much larger SoC designs and having complementary test requirements. This design includes specification and architecture of the IP blocks, development of robust schematics for analogue part and RTL model for logical part, implementation of DfT techniques and layout in advanced CMOS processes,- Design and fabrication of testchips including the two IP blocks;
- Characterisation and test of the testchips using on-chip test structures and industrial test equipment together with laboratory test benches for measuring the efficiency of the DfT solutions and the performances of the IP blocks;
- Evaluation of the impact of DfT on the performances of the selected converters;
- Use of the IP blocks by Alcatel Microelectronics through the insertion in its IP library and by Dolphin through inclusion in its IP catalogue;
- Dissemination of results through academic courses and international conferences,- Submission of the result to standardisation organisations (VISA, IEEE).
Milestones:
- Month 12: Description of architectural and structural DfT techniques adapted to the high-resolution converters, specifications of the silicon demonstrators.
- Month 20&30: Characterisation results of the testchips, conclusion on the efficiency of the selected DfT techniques.
- Months 30: Generic recommendations for the test reusability of analogue macrocells, inclusion of the IP blocks in the library of AME, use of the IP blocks through Dolphin, finalisation of dissemination activities.
Dziedzina nauki (EuroSciVoc)
Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: Europejski Słownik Naukowy.
Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: Europejski Słownik Naukowy.
- nauki przyrodnicze nauki biologiczne zoologia mammalogia cetologia
- nauki przyrodnicze nauki fizyczne elektromagnetyzm i elektronika mikroelektronika
- nauki przyrodnicze nauki chemiczne chemia nieorganiczna metaloidy
Aby użyć tej funkcji, musisz się zalogować lub zarejestrować
Program(-y)
Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.
Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.
Temat(-y)
Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.
Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.
Zaproszenie do składania wniosków
Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.
Brak dostępnych danych
Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.
System finansowania
Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.
Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.
Koordynator
38240 MEYLAN
Francja
Ogół kosztów poniesionych przez organizację w związku z uczestnictwem w projekcie. Obejmuje koszty bezpośrednie i pośrednie. Kwota stanowi część całkowitego budżetu projektu.