Cel
The objective of this project is to establish a rationale of strength and fatigue testing.
If wind energy is to contribute to a greater extent to the electricity production, the generating cost has further to be reduced. This can be achieved by the reduction of machine manufacturing cost and by the improvement of system and structural reliability. Machines may become improved by thorough fatigue life analysis in the design phase. An important cost driver of a wind turbine is among others the rotor. A sensible method of making turbine rotors cheaper is obtained by making them lighter. To guarantee a rotor blade against early failure, whether caused by insufficient strength or fatigue, it is necessary to check the design by an approval test. In particular the fatigue life analysis is still quite unreliable, a specimen tested in laboratory conditions will fail quite often by Miner summations between 0.25 and 4 for constant amplitude test and between 0.6 and 1.6 for variable amplitude test. One method, and maybe the only method, to proof the reliability of the design is to perform a full scale strength and fatigue test. These tests might also be required in future by the certification authorities to get a full type certificate.
Main project items :
- Recommendations on procedures and criteria with regard to :
. strength tests (ST);
. dynamic tests (DT);
. fatigue tests (FT).
[Address the "should" and if so "when" question]
- Ibid on test procedures, such as :
. number of cross sections at which design loads has to be simulated (ST & FT);
. elastic behaviour, natural frequencies and ditto modes and mechanical damping (DT);
. rational on strength and fatigue boundary (ST & FT);
. rational on the translation of design to that fatigue spectrum (FT); . indication of strength and fatigue margins.
[Address the "how" question]
- Demonstration of these kind of tests.
- Cost & benefit analyses.
Dziedzina nauki (EuroSciVoc)
Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc
Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: https://op.europa.eu/en/web/eu-vocabularies/euroscivoc
Aby użyć tej funkcji, musisz się zalogować lub zarejestrować
Przepraszamy… podczas wykonywania operacji wystąpił nieoczekiwany błąd.
Wymagane uwierzytelnienie. Powodem może być wygaśnięcie sesji.
Dziękujemy za przesłanie opinii. Wkrótce otrzymasz wiadomość e-mail z potwierdzeniem zgłoszenia. W przypadku wybrania opcji otrzymywania powiadomień o statusie zgłoszenia, skontaktujemy się również gdy status ulegnie zmianie.
Temat(-y)
Zaproszenie do składania wniosków
Brak dostępnych danychSystem finansowania
CSC -Koordynator
PETTEN
Niderlandy