Skip to main content
Przejdź do strony domowej Komisji Europejskiej (odnośnik otworzy się w nowym oknie)
polski pl
CORDIS - Wyniki badań wspieranych przez UE
CORDIS
Zawartość zarchiwizowana w dniu 2024-04-16

Optimizing heat transfer for gas / particle flows in heat exchangers for fluidized bed systems

Cel

To establish empirical correlations and develop numerical codes for optimising the design of heat exchangers operating in freeboard regions of fluidised bed reactors. The correlations and the codes will enable designers of cross flow tubular heat exchangers to choose the array geometry which would yield optimal heat transfer for a particular operational environment.

The work will be conducted jointly by Trinity College, Dublin and Intron BV, Netherlands and will cover the following phases:

1) Local Heat Transfer Measurements.

An existing facility for local and overall heat transfer measurements will be used to examine the effects of finer particles as recent work has indicated that the greatest enhancement of heat transfer is achieved with small particles. In order to verify correlations developed from preliminary studies, a greater range of flow rates, typical of fluidised bed combustors, will be examined. In addition, the effect of varying the tube array lay-out and geometry and the influence of particle properties will be investigated.

2) Laser Anemometry Measurements.

A single channel LDA system will be used to examine the effect of particles on both velocity and turbulence characteristics in the boundary layer and through flow regions for a single cylinder and a tube array. The data will be used to provide a fundamental understanding of the heat transfer measurements and as validation for the numerical codes.

3) Numerical Analysis.

Numerical procedures are to developed for the prediction of heat transfer in gas/particle flows. The core of the predictions will be the tracking of particle trajectories such that correlations based on local particle concentrations and residence times can be implemented and the influence of the particles on the flow and turbulence characteristics of the carrier phase.

Dziedzina nauki (EuroSciVoc)

Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: Europejski Słownik Naukowy.

Aby użyć tej funkcji, musisz się zalogować lub zarejestrować

Program(-y)

Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.

Temat(-y)

Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.

Brak dostępnych danych

Zaproszenie do składania wniosków

Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.

Brak dostępnych danych

System finansowania

Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.

CSC - Cost-sharing contracts

Koordynator

THE PROVOST, FELLOWS AND SCHOLARS OF THE COLLEGE OF THE HOLY AND UNDIVIDED TRINITY OF QUEEN ELIZABETH NEAR DUBLIN HEREINAFTER TRINITY COLLEGE DUBLIN
Wkład UE
Brak danych
Adres
Trinity College
2 DUBLIN
Irlandia

Zobacz na mapie

Koszt całkowity

Ogół kosztów poniesionych przez organizację w związku z uczestnictwem w projekcie. Obejmuje koszty bezpośrednie i pośrednie. Kwota stanowi część całkowitego budżetu projektu.

Brak danych

Uczestnicy (1)

Moja broszura 0 0