Physical and mechanical properties of densified veneer wood (DVW) forstructural applications

Informacje na temat projektu

Identyfikator umowy o grant: MA2B910033

Projekt został zamknięty

Data rozpoczęcia 1 Listopada 1991

Data zakończenia 31 Lipca 1994

Finansowanie w ramach

• Specific research and technological development programme (EEC) in the fields of raw materials and recycling - Renewable raw materials: Forestry and wood products (including cork) -, 1990-1992

Koszt całkowity € 0,00

Wkład UE Brak danych

Koordynowany przez

Technische Universiteit Delft
Netherlands

Exploitable results

Physical and mechanical properties of densified veneer wood for structural applications

The project revealed that densified veneer wood (DVW) is a material which can be used to reinforce timber in order to sustain highly concentrated loads. In build up structural joints, densified veneer wood glued on the shear surface of timber elements, was found to increase the strength capacity over a factor of 4 compared to traditional joinery. This has been accomplished in combination with the tube dowels developed in the project. Tube dowels are mechanical fasteners which after being positioned in the holes are expanded in diameter to remove all clearance. The benefits of DVW include savings of timber (15% to 30%) in construction, improvement of the structural behaviour in portal frames and the ductility at ultimate limit state. As well as the design and consulting engineers, other benefiting sectors include the producers of densified veneer, glued laminated timber and hydraulic equipment.