Skip to main content
Przejdź do strony domowej Komisji Europejskiej (odnośnik otworzy się w nowym oknie)
polski pl
CORDIS - Wyniki badań wspieranych przez UE
CORDIS
Zawartość zarchiwizowana w dniu 2024-04-16

CLEAN SOLUTION FOR THE ELECTROLYTIC ZINC PLANTS IRON RESIDUE

Cel

This research project will investigate a combination of hydrometallurgy for iron precipitation and pyrometallurgy for treatment of the precipitate. The aim of this project is to improve the quality of the iron residues coming from the zinc hydrometallurgy, and which could be used by other industries such as the cement or steel industry.
By combining an optimized hydrometallurgical route with a thermal treatment, a cleaner solution has been developed for iron residue. The iron slag produced can be considered as inert material.

Goethite requires 15% less energy to be smelted than jarosite.
Complete sulphur removal by calcination cannot be reached because gypsum decomposes at temperature higher than the melting. Therefore, a 1 step thermal treatment, avoiding the multiplication of sulphur dioxide gas cleaning systems has been developed.

To manage a bleed for the hydrolizable impurities a flowsheet composed of 4 stages (reduction, neutralization to pH = 2, partial goethite precipitation at pH about 3.5 main 'clean' goethite at pH = 3) was developed for treating the acid leach overflow.

Incorporation of some impurities in the 'clean' goethite from the neutralizing agent (calcine) is unavoidable.
To avoid high consumption of coke at the fuming step of the thermal route, it is important to keep the zinc content of the goethite as low as possible by appropriate choice of the pH (determined at 3). Zinc content will be in the range of 7%.
Several batches of industrial goethite were smelted in an electric furnace. The goethite is smelted into a slag mainly composed of iron silicate. By adding coke, the zinc, lead arsenic and cadmium are volatilized in the off gases producing very clean slags.

Preliminary sizing of the main process equipment items was performed and a factored capital cost estimate has been prepared.
Comparing operating costs to the 200000 t/year zinc production, means that this additional treatment cost cannot be afforded by any zinc producer with the current zinc price.
If a thermal route is needed to put iron into unleachable form, it should be far simplier and cheaper. Also, it will replace a potential environmental risk of soil pollution (dumping) by a high energy consumption with the corresponding carbon dioxide emission.
This programme has 2 parts:
the hydrometallurgical part, where the conditions of iron precipitation will be reviewed to get a goethite free of one or more of the following groups of impurities, zinc, lead, minor impurities (arsenic, selenium, antimony, cerium and fluorine) and sulphate.
and pyrometallurgical treatment in electrical furnace of conventional goethite and also of the improved goethite obtained above.

Dziedzina nauki (EuroSciVoc)

Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: Europejski Słownik Naukowy.

Aby użyć tej funkcji, musisz się zalogować lub zarejestrować

Program(-y)

Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.

Temat(-y)

Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.

Brak dostępnych danych

Zaproszenie do składania wniosków

Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.

Brak dostępnych danych

System finansowania

Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.

CSC - Cost-sharing contracts

Koordynator

Métaleurop Recherche SA
Wkład UE
Brak danych
Adres
1 avenue Albert Einstein
78193 Trappes
Francja

Zobacz na mapie

Koszt całkowity

Ogół kosztów poniesionych przez organizację w związku z uczestnictwem w projekcie. Obejmuje koszty bezpośrednie i pośrednie. Kwota stanowi część całkowitego budżetu projektu.

Brak danych

Uczestnicy (2)

Moja broszura 0 0