European Commission logo
polski polski
CORDIS - Wyniki badań wspieranych przez UE
CORDIS
Zawartość zarchiwizowana w dniu 2024-04-15

STUDY OF A MODULAR DEVICE PERMITTING AUTOMATIC RECOGNITION OF FLEXIBLE MATERIAL DEFECTS

Cel


This project succeeded in developing a prototype inspection system for textiles, which operates at industrial speeds. The software and hardware produced allow high-speed inspection of wide format fabrics.

BASED ON THE USE OF A CAMERA THE DETECTION WILL FIRST BE APPLIED TO STRUCTURAL DEFECTS OF SINGLECOLOURED FABRICS WITH A RECOGNITION OF THE TYPE OF DETECTED DE FECT.

SOME PRELIMINARY TESTS PERFORMED ON SHORT WIDTH FABRICS (20 CM) HAVE SHOWN THE FEASIBILITY OF DEFECT DETECTION ON MATERIALS MOVING AT THE RATE OF 40 M/MIN BY MEANS OF A CAMERA.

THEN THE DETECTION OF STRUCTURAL DEFECTS AND DESIGN DEFECTS WILL BE UNDERTAKEN ON MATERIALS WITH DIFFERENT COLOURED ELEMENTS, FOR INSTANCE DYED YARN FABRICS.
DETECTION ON AN INSPECTION TABLE FOR EXAMPLE SHOULD SHOW THE REAL TIME IDENTIFI CATION AND CLASSIFICATION OF DIFFERENT DEFECTS AS WELL AS THE CHARACTERISTICS O F EACH DEFECT ON THE TESTED MATERIALS.

Temat(-y)

Data not available

Zaproszenie do składania wniosków

Data not available

System finansowania

CSC - Cost-sharing contracts

Koordynator

INSTITUT TEXTILE DE FRANCE
Wkład UE
Brak danych
Adres
30,Avenue Guy de Collongue
69132 ECULLY
Francja

Zobacz na mapie

Koszt całkowity
Brak danych

Uczestnicy (3)