Ziel
AIM OF THE PROPOSED PROJECT IS TO PREPARE HYBRID SIC-SI3N4 COATINGS, AND TO STU DY THEIR PROPERTIES AS FUNCTION OF COMPOSITION AND PROCESS CONDITIONS. SPECIAL ATTENTION WILL PAID TO THE IMPROVEMENT OF ADHERENCE CHARACTERISTICS.
The project met its goal of developing a new generation of substrate coatings that can be applied to a number of substrates at low temperatures. In addition to testing several deposition and substrate materials, a hydrogen-nitrogen etching process was developed and proved to increase adhesion.
A COMPOSITE SIC-SI3N4 COATING IS VERY INTERESTING BECAUSE OF ITS COMBINED PROPERTIES. FOR INSTANCE INCREASE OF THERMAL AND ELECTRICAL CONDUCTIVITIES, RELAXATION OF INTERNAL STRESS CAN BE OBSERVED WHEN SIC IS INTRODUCED INTO SI3N4. ALSO GOOD WEAR AND EROSION RESISTANCE CAN BE EXPECTED. BY USING A PLASMA ENHANCED CVD (PECVD) PROCESS IT IS POSSIBLE TO SYNTHESIZE THESE FILMS AT PROCESSING TEMPERATURES WELL BELOW 500 CELSIUS DEGREES. IN THIS WAY A VARIETY OF SUBSTRATES WHICH CANNOT BE COATED BY CONVENTIONAL CVD MAY BE USED. THE RADIO-FREQUENCY DISCHARGE USED DURING CVD WITH PLASMA EXCITATION IS A VERY EFFICIENT MEANS OF REMOVING CONTAMINANTS FROM EG METAL SUBSTRATES. IN THIS WAY A ONE-STEP PROCESS COMBINES SUBSTRATE CLOANING AND COATING. THIS WILL IMPROVE THE ADHESION OF THE COMPOSITE COATING.
Wissenschaftliches Gebiet
- engineering and technologyelectrical engineering, electronic engineering, information engineeringinformation engineeringtelecommunicationsradio technologyradio frequency
- natural sciencesphysical scienceselectromagnetism and electronics
- engineering and technologymaterials engineeringcomposites
- engineering and technologymaterials engineeringcoating and films
- natural scienceschemical sciencesinorganic chemistrymetalloids
Programm/Programme
Thema/Themen
Data not availableAufforderung zur Vorschlagseinreichung
Data not availableFinanzierungsplan
CSC - Cost-sharing contractsKoordinator
7903 AG Hoogeveen
Niederlande