Skip to main content
Przejdź do strony domowej Komisji Europejskiej (odnośnik otworzy się w nowym oknie)
polski pl
CORDIS - Wyniki badań wspieranych przez UE
CORDIS
Zawartość zarchiwizowana w dniu 2022-12-27

INTEGRATED TENSION LEG PLATFORM SIMULATOR

Cel

MCS propose the development of a general purpose simulation package, named ITLPS for the integrated analysis and design of the motions and forces on the complete TLP structure including platform, risers and tethers. The structural system will be discretised by the finite element technique in three dimensions with platform and tether/riser elements as one integrated spaceframe. An additional innovation will be the capability of modelling the risers as flexible beam elements attached to the platform. All wind, wave and fluid current loading functions, including higher order terms such as slow drift and damping forces, will be included in a computationally efficient form based on a consistent set of hydrodynamic assumptions. Pre-and post-processors including a customised database will be attached such that the system may be readily accessed by design engineers.
An integrated spaceframe finite element model of a TLP including superstructure, deck, columns, pontoons, tethers and risers may be assembled using three-dimensional beam-column finite elements. Semi - analytical solutions have been obtained for the wave potentials due to diffraction and radiation about vertical open-bottom columns and rectangular submerged pontoons. Static and dynamic spectral wind loading from an arbitrary direction may be specified for an element set or group; this set models the superstructure as a spaceframe with special element properties relating to the wind area and local parameters. Similarly a formulation for lift forces due to vortex shedding on tethers and risers is available.
The overall equilibrium equations in the frequency domain for the TLP may be solved about the original undeformed equilibrium position and also about a static nonlinear configuration due to large drift motions of the TLP. A procedure for the stochastic linearisation of noncollinear random waves and current is developed for the hydrodynamic forces on the tethers and riser sections. Data is presently being collected for the testing and verification phases of the project.
The major result to date is the derivation of the semi-analytical functions for the hydrodynamic loads on the TLP columns and pontoons. These are not available elsewhere for the configurations in question and are expected to overcome the excessive computational problems associated with competing computer-based numerical methods. The other results are associated with the implementation and testing of the load modules for wind loading, vortex shedding, spaceframe motions and various solution schemes. The major remaining step is to integrate all the load modules into the finite element package and execute the ITLPS suite using realistic field data.
A number of test cases have been executed for deepwater areas, such as the very hostile environment of the Porcupine Bank off the West coast of Ireland. The Irish certification authority, EOLAS, has validated the results.
The project was carried out in five stages. These were:
1. THE DEVELOPMENT
Development of an integrated spaceframe finite element model of complete TLP: columns, pontoons, tethers and risers, with solution in the frequency domain.
2. THE DERIVATION
The derivation of semi-analytical solutions for wave forces, added and potential dampening coefficients for large body structures, using diffraction theory.
3. A LINEAR FREQUENCY DOMAIN SOLUTION
Linear frequency domain solution about a nonlinear large deflection static position, with all environmental loads. This is coupled dynamic analysis in the frequency domain using a combination of diffraction theory for pontoons and columns, and Morison's equation for tethers and risers.
4. THE COLLECTION
Collection of environmental data and execution of test case for the Porcupine, offshore Ireland.
5. THE INDEPENDENT ASSESSMENT
Independent assessment of ITLPS capabilities by EOLAS, the Irish certification authority.

Dziedzina nauki (EuroSciVoc)

Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: Europejski Słownik Naukowy.

Projekt nie został jeszcze sklasyfikowany według klasyfikacji EuroSciVoc.
Wskaż dziedziny nauki, które twoim zdaniem są najbardziej istotne z punktu widzenia tego projektu i pomóż nam usprawnić naszą usługę klasyfikacji.

Aby użyć tej funkcji, musisz się zalogować lub zarejestrować

Program(-y)

Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.

Temat(-y)

Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.

Zaproszenie do składania wniosków

Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.

Brak dostępnych danych

System finansowania

Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.

DEM - Demonstration contracts

Koordynator

MCS INTERNATIONAL
Wkład UE
Brak danych
Adres
BUTTERMILK WALK 2-3
Galway
Irlandia

Zobacz na mapie

Koszt całkowity

Ogół kosztów poniesionych przez organizację w związku z uczestnictwem w projekcie. Obejmuje koszty bezpośrednie i pośrednie. Kwota stanowi część całkowitego budżetu projektu.

Brak danych
Moja broszura 0 0