Skip to main content
Przejdź do strony domowej Komisji Europejskiej (odnośnik otworzy się w nowym oknie)
polski pl
CORDIS - Wyniki badań wspieranych przez UE
CORDIS

Rubber & Elastomer Development for MArtian enviRonment applicationS

Opis projektu

Materiał gumowy, który może przetrwać marsjańskie warunki

Lekkie materiały charakteryzujące się doskonałym stosunkiem wytrzymałości do masy i odporne na zużycie mogą wytrzymać trudne warunki panujące na Marsie. Zespół finansowanego w ramach działań „Maria Skłodowska-Curie” projektu RED 4 MARS planuje opracowanie materiału gumowego o ulepszonych właściwościach, który będzie w stanie wytrzymać wysokie dawki promieniowania kosmicznego i niskie temperatury panujące na powierzchni Marsa. Opracowany materiał gumowy będzie charakteryzował się niską temperaturą zeszklenia. Naukowcy ponadto zamierzają wyposażyć go w grupy funkcjonalne oraz możliwości samoregeneracji, a także wypełniacze wzmacniające, które zapewnią doskonałe właściwości mechaniczne i odporność na zużycie.

Cel

While imagining future Martian exploration and colonization one mustn’t forget about new materials assuring required performance and resistance to the harsh Martian conditions. One of the most unique materials used in engineering is rubber, providing both elastic and damping properties. Currently, the rubber used on Earth exhibit too low resistance against Martian environment. This project aims to overcome this issue by designing rubber withstanding harsh Martian conditions (presence of radiation and low operating temperature). This tailor-made rubber will have a low glass transition temperature (elasticity at low temperatures), contain functional and self-healing groups (radiation resistance) and reinforcing fillers for good mechanical properties (operational performance). For a sustainable approach, the use of local materials will be investigated by synthesizing reinforcing silica from Martian regolith, and the recyclability will be optimized to extend the utilization time of the materials. My background in designing versatile rubber materials for special applications and being familiar with extra-terrestrial conditions in the Solar system allows me to carry out successfully this MSCA IG Global Fellowship, under the supervision of Prof. Dr. Anke Blume and Dr. Wilma Dierkes hosted at University of Twente (UT), in one of the leading rubber groups in the world: Elastomer Technology and Engineering (ETE). The outgoing phase will be done at the University of Akron (UA) for 24 months under supervision of Dr. Li Jia. UA has a long experience in rubber education (since 1909) and is cooperating with the Glenn Research Center of NASA. Short scientific visits are also planned to perform radiation resistance measurements and prototype rubber testing.

Dziedzina nauki (EuroSciVoc)

Słowa kluczowe

Program(-y)

Temat(-y)

System finansowania

MSCA-IF - Marie Skłodowska-Curie Individual Fellowships (IF)

Wyświetl wszystkie projekty finansowane w ramach tego programu finansowania

Zaproszenie do składania wniosków

(odnośnik otworzy się w nowym oknie) H2020-MSCA-IF-2020

Wyświetl wszystkie projekty finansowane w ramach tego zaproszenia

Koordynator

UNIVERSITEIT TWENTE
Wkład UE netto
€ 253 052,16
Koszt całkowity
€ 253 052,16

Partnerzy (1)