Wyniki projektu
CORDIS oferuje możliwość skorzystania z odnośników do publicznie dostępnych publikacji i rezultatów projektów realizowanych w ramach programów ramowych HORYZONT.
Odnośniki do rezultatów i publikacji związanych z poszczególnymi projektami 7PR, a także odnośniki do niektórych konkretnych kategorii wyników, takich jak zbiory danych i oprogramowanie, są dynamicznie pobierane z systemu OpenAIRE .
Rezultaty
The 2nd report on electromagnetic properties of developed and refined alloys describes (i) the interim results of electrical resistivity properties of powders, melt-spun ribbons, as-cast specimens and additive manufactured parts, (ii) the interim results of the experimental studies of the basic and advanced magnetic parameters of the same materials listed in part (i), and (iii) the interim evaluation study of the relationship between magnetic properties-alloy variation-processing method.
3rd Report on physical properties of developed alloys (odnośnik otworzy się w nowym oknie)The 3rd and last report on physical properties of finally optimized alloys summarises the project’s results in terms of (i) structural and microstructural properties, (ii) thermal properties, (iii) mechanical properties, and (iv) electromagnetic properties for the finally optimized alloy compositions in as-spun and as-cast conditions.
2nd Report on alloying technology development (odnośnik otworzy się w nowym oknie)The 2nd and final report of alloying technology development describes (i) the finally optimized processing techniques developed at the laboratory-scale for the preparation of master alloys (pre-alloying), amorphous melt-spun ribbons, and as-cast bulk metallic glasses, and (ii) the results of the study of the influence of raw elements purity for the preparation of the materials listed in point (i).
1st Report on the relationship between SLM processing, micro/structure and materials properties of simple geometry specimens (odnośnik otworzy się w nowym oknie)The 1st report on the relationship between selective laser melting (SLM) processing, microstructure, structure and macroscopic materials properties of simple geometry specimens is based on the combined consortium results of (i) structural and microstructural studies, (ii) thermal analyses, (iii) electromagnetic studies, (iv) macro/micro-mechanical testing.
1st Report of guidelines for new standards for magnetic testing (odnośnik otworzy się w nowym oknie)The 1st report on guidelines for new standards for magnetic testing describes the activities carried out to generate guidelines for new standard testing of magnetic core performance of motor soft magnetic components produced by additive manufacturing of amorphous metals.
1st Report on TPF studies and materials properties (odnośnik otworzy się w nowym oknie)The 1st report on thermoplastic forming (TPF) studies and materials properties summarises the first-year results of (i) TPF-ability of amorphous powder and as-cast metallic glasses, and (ii) mechanical testing of the first sets of TPF specimens.
2nd Report on TPF studies and materials properties (odnośnik otworzy się w nowym oknie)The 2nd and last report on thermoplastic forming (TPF) studies and materials properties consists of a summary of the study of the TPF ability using amorphous samples in form of powders, as-cast and additive manufactured samples.
1st Report on physical properties of developed alloys (odnośnik otworzy się w nowym oknie)The 1st report on physical properties of developed alloys in as-cast conditions describes the first-year results in terms of their (i) structural and microstructural properties, (ii) thermal properties, (iii) mechanical properties, and (iv) electromagnetic properties.
2nd Report on prototype magnetic performance using IEC standards (odnośnik otworzy się w nowym oknie)The 2nd report on prototype magnetic performance using IEC standards describes (i) the interim results of magnetic core performance testing of complex parts, and (ii) interim results on the energy efficiency reliability and sustainability study.
3rd Documentation of machine performances (odnośnik otworzy się w nowym oknie)This final report on machine performance is expected to demonstrate the reduction of internal losses in a compact electric machine which would be the achievement of the main project goal and represents the final Milestone 7: “Viability of AM2SoftMag technology: ‘Proof-of-concept’”. By determining the efficiency of the AM SMM-based machine in comparison to one based on conventional SMM components, it will be possible to project the energy saving potential of the new SLM material based on the development achievements of the AM2SoftMag project.
1st Report on alloying technology development (odnośnik otworzy się w nowym oknie)The 1st report of alloying technology development describes (i) the processing techniques developed at the laboratory-scale for the preparation of master-alloys (pre-alloying), melt-spinning, and casting, and (ii) the first results from the study of the influence of purity of raw elements to the processing ability.
1st Report of electromagnetic properties of developed alloys, including magnetic properties vs. processing method assessment (odnośnik otworzy się w nowym oknie)The 1st report on electromagnetic properties of first year developed alloys describes (i) the results of electrical resistivity properties of powders, melt-spun ribbons, as-cast specimens and additive manufactured specimens, (ii) the results of measurements of the basic and advanced magnetic parameters of the same materials listed in part (i), and (iii) a first evaluation of magnetic properties versus alloy variation versus processing method.
1st Report on processing protocols for powder production & powder properties (odnośnik otworzy się w nowym oknie)The 1st report on processing protocols for powder production and powder properties summarises (i) the first-year activities to optimize gas atomisation protocols for powder batches sizes of max. 5 Kg, and (ii) the first-year powder characterisation results in terms of size, shape, apparent density and flowability.
2nd Report on the relationship between SLM processing, micro/structure and materials properties of simple geometry specimens (odnośnik otworzy się w nowym oknie)2nd report on the relationship between selective laser melting (SLM) processing, micro/structure and materials properties of simple geometry specimens based on consortium results of (i) structural and microstructural studies, (ii) thermal analyses, (iii) electromagnetic studies, and (iv) macro/micro-mechanical testing. This report will provide a first comprehensive experimental assessment of the relationship between SLM processing and intrinsic materials properties, which fulfils Milestone 3.
Report on properties of large powder batches (odnośnik otworzy się w nowym oknie)Report on properties and characteristics of larger batches of powders in terms of their chemical composition, phase composition, structure, homogenity and contamination as well as particle size distribution and sphericity.
2nd Report on processing protocols for powder production and powder properties (odnośnik otworzy się w nowym oknie)The 2nd and last report on processing protocols for powder production and powder properties of batches up to 5Kg summarises the (i) powder production activities, and (ii) powder characterisation results in terms of size, shape, apparent density and flowability.
1st Documentation of machine performances (odnośnik otworzy się w nowym oknie)Each completed electric machine involving AM amorphous SMM components will be investigated with respect to its performance and efficiency using available motor test stands. The documentation of machine performances should support the comparison with electric machines based on conventional SMM components and emphasize any improvements such as increased efficiency.
2nd report of guidelines for new standards for magnetic testing (odnośnik otworzy się w nowym oknie)The 2nd and last report on guidelines for new standards for magnetic testing provides a proof that Milestone 5: “Guidelines for standard magnetic testing for AM2SoftMag Soft Magnetic Materials (SMM)” is achieved. This report describes (i) the identified limitations, if any, of the current international measuring standards (e.g., the IEC 60404 series) for standard testing of the magnetic core performance of motor components produced via additive manufacturing of amorphous alloys, and (ii) identified revision procedures (guidelines) to be suggested to the attention of the National IEC Committees.
3rd Report of electromagnetic properties of developed alloys, including magnetic properties vs. processing method assessment (odnośnik otworzy się w nowym oknie)The 3rd and last report on electromagnetic properties of developed alloys summarises (i) the project-related results of alloy electrical resistivity properties, and (ii) the measurements of basic and advanced magnetic parameters of developed alloys and provides (iii) final assessment of the relationship between magnetic properties-alloy composition-processing method.
Report on properties of small batches of powders produced via different techniques (odnośnik otworzy się w nowym oknie)Summary of properties of small batches of powders produced via different techniques that will include different heat sources i) induction, ii) plasma. Comparison of the powders according to requirements and suitability for Additive Manufacturing
3rd Report on the relationship between SLM processing, micro/structure and materials properties of simple geometry specimens (odnośnik otworzy się w nowym oknie)The 3rd and last report on the relationship between selective laser melting (SLM) processing, micro/structure and materials properties of simple geometry specimens provides the final assessment for this relationship, based on consortium results of (i) structural and microstructural studies, (ii) thermal analyses, (iii) electromagnetic studies, and (iv) macro/micro-mechanical testing.
2nd Documentation of machine performances (odnośnik otworzy się w nowym oknie)An update of D7.4 including new performance tests and documenting new designs.
A brief documentation with text and photos will accompany each completed electric machine prototype.
Proof of website creation and project logo set up by the project coordinator to act as a hub for the network, with open access sections in order to raise awareness and to communicate important results and achievements.
Publikacje
Autorzy:
Klein Carsten, Thorsson Lena, May Christopher, Nienhaus Matthias
Opublikowane w:
2024 International Conference on Electrical Machines (ICEM), 2024, ISSN 2473-2087
Wydawca:
IEEE
DOI:
10.22028/D291-44667
Autorzy:
Amirhossein Ghavimi, Maryam Rahimi Chegeni, Lucas Ruschel, Bastian Adam, Marcos Rodríguez-Sánchez, Maria Teresa Perez-Prado, Isabella Gallino, Ralf Busch
Opublikowane w:
Materials Today Communications, Numer 51, 2026, ISSN 2352-4928
Wydawca:
Elsevier BV
DOI:
10.1016/J.MTCOMM.2026.114741
Autorzy:
S. Sadanand, M. Rodríguez-Sánchez, A. Ghavimi, R. Busch, P. Sharangi, P. M. Tiberto, E. Ferrara, G. Barrera, L. Thorsson, H. J. Wachter, I. Gallino, M. T. Pérez-Prado
Opublikowane w:
Journal of Laser Applications, Numer 36, 2024, ISSN 1042-346X
Wydawca:
Laser Institute of America
DOI:
10.22028/D291-44532
Autorzy:
Lena Thorsson, Mattias Unosson, María Teresa Pérez-Prado, Xueze Jin, Paola Tiberto, Gabriele Barrera, Bastian Adam, Nico Neuber, Amirhossein Ghavimi, Maximilian Frey, Ralf Busch, Isabella Gallino
Opublikowane w:
Materials & Design, Numer 215, 2022, ISSN 0264-1275
Wydawca:
Elsevier BV
DOI:
10.22028/D291-38103
Autorzy:
M. Rodríguez-Sánchez, A.D. Boccardo, S. Sadanand, A. Ghavimi, R. Busch, P. Sharangi, E. Ferrara, G. Barrera, P. Tiberto, D. Tourret, I. Gallino, M.T. Pérez-Prado
Opublikowane w:
Additive Manufacturing, Numer 110, 2025, ISSN 2214-8604
Wydawca:
Elsevier BV
DOI:
10.1016/J.ADDMA.2025.104922
Autorzy:
M. Rodríguez-Sánchez, S. Sadanand, A. Ghavimi, R. Busch, P. Tiberto, E. Ferrara, G. Barrera, L. Thorsson, H.J. Wachter, I. Gallino, M.T. Pérez-Prado
Opublikowane w:
Materialia, Numer 35, 2024, ISSN 2589-1529
Wydawca:
Elsevier B.V
DOI:
10.22028/D291-44534
Autorzy:
C. Garrote-Junco, A. Ghavimi, R. Busch, M.T. Pérez-Prado, M. Rodríguez-Sánchez
Opublikowane w:
Additive Manufacturing Letters, Numer 15, 2025, ISSN 2772-3690
Wydawca:
Elsevier BV
DOI:
10.1016/J.ADDLET.2025.100345
Autorzy:
Carsten Klein; Christopher May; Matthias Nienhaus
Opublikowane w:
Actuators, Numer 13, 2024, ISSN 2076-0825
Wydawca:
Actuators
DOI:
10.22028/D291-41820
Autorzy:
S. Sadanand, A.D. Boccardo c , B. Yang, M. Rodríguez-Sánchez, A. Ghavimi, R. Busch, I. Gallino, M.T. Pérez-Prado
Opublikowane w:
Additive Manufacturing, 2026, ISSN 2214-8604
Wydawca:
Science Direct
DOI:
10.22028/D291-47461
Wyszukiwanie danych OpenAIRE...
Podczas wyszukiwania danych OpenAIRE wystąpił błąd
Brak wyników