Breakthrough European tEchnologies Yielding cOnstruction sovereigNty, Diversity & Efficiency of ResourceS

Rezultaty

BEEYONDERS Contribution to Standardization

D8.7 will have 2 versions on M12 and M42. This deliverable is about the contribution to standardization and needs an update to consider a first approach in the first year (M12) and the final conclusions at the end of the project (M42). This deliverable will be mainly related to the task T8.6.

Dissemination and Communication Plan

"The deliverable: ""Dissemination and Communication Plan"" will include the planning related to the Dissemination and Communication strategy of BEEYONDERS, built on the prioritisation of certain groups of stakeholders. This deliverable will be mainly associated to the task T8.2, but including information of the WP8 in general."

Technical Requirements

"The deliverable: ""Technical Requirements"" will be related to the technical objectives required and focused on the final technological state that is defined for each technological development. Associated to the task T2.2, it will develop a methodology to measure the technical target level of these developments, to precisely define, measure and control the progress of each technical goal of the project."

Liaison Activities

D8.6 will have 2 versions on M12 and M42. This deliverable is about Liaison Activities and needs an update to consider a first approach in the first year (M12) and the final conclusions at the end of the project (M42). This deliverable will be mainly related to the task T8.5.

Digital Twin Design and Architecture

"The deliverable: ""Digital Twin Design and Architecture"" will include the results on the development of the functional and user requirements for the Digital Twin system. It will be mainly related to the task T3.1."

System Requirements

"Te deliverable: ""System Requirements"" will be dedicated to the generation and description of the general objectives of the project, which must be present throughout its duration. It is mainly related to T2.1, and together with the requirements of T2.2, will serve to guide the developments carried out in the technical WPs."

LCA/LCC KPIs

"The deliverable: ""LCA/LCC KPIs"" will comprises the development of LCC and LCA KPIs, which will be used for circularity assessment of the implementation of new BT. KPIs will consider sustainability requirements (multi adaptability, lifespan extension options, high value recycling / re-use options, carbon capture capacity, etc.). Quantitative methods to verify these KPIs will be integrated into the Digital Twin database, allowing a visualization on its dedicated interface. These developed KPIs will be validated and enhanced in close collaboration with other project partners in other WPs and applied on the case studies of WP7. This deliverable will be mainly related to the task T2.3."

Workers KPIs

"The deliverable: ""Workers KPIs"" comprises a list of worker KPIs covering safety, health, well-being, technology acceptance, and worker performance. It will define and categorize them to provide a measurement framework to assess the impact of BT on the workforce. It will be mainly related to the task T2.4"

Testing Plan and Report

D2.5 will have 2 versions M15 and M24. This deliverable is about Testing Plan and Report and needs an update to consider both the initial considerations for testing plan (M15) and the results obtained in this phase (M24). This deliverable will comprise the design and the stablishment of the methodology for the technologies to be followed, to assure that medium TRL5 is well stablished prior to the TRL6 validation in WP7. It will be mainly related to T2.5.

Technology Market Outlook report

"The deliverable: ""Technology Market Outlook report"" will include the results related to the alignment of the project developments with the actual market needs, incorporating the monitoring of the related technology trends and associated markets and the international competitive technologies. This deliverable will be mainly associated to the task T8.3."

Common Methodology and Specifications for Case Study Development and Technology Integration Assessment

"The deliverable: ""Common Methodology and Specifications for Case Study Development and Technology Integration Assessment"" will include the results related to a common methodology for ensuring a coherent development of the demonstration and validation activities (T7.2 to T7.7). Besides, common templates prepared for the reporting of the demonstration campaigns, and for the collection and analysis of data will be included. This deliverable will be mainly related to the task T7.1."

Report on Dissemination and Communication Activities

D8.4 will have 2 versions on M21 and M42. This deliverable is about Report on Dissemination and Communication Activities and needs an update to consider the dissemination activities report on the first half of the project (M21) and on the second half (M42). This deliverable will be mainly associated to the task T8.2 and WP8 in general.

Learning Activities Resources

"The deliverable: ""Learning Activities Resources"" will include the results on the creation and testing of a first kind of multiplayer user-centric active and serious gaming learning environment that will enhance the understanding of construction trainees or the existing workforce for the identification and mitigation of various risk levels in a construction workplace. This deliverable will be mainly related to the task T5.3."

Publikacje

Automatic Labeling for Thermal Imaging Datasets Generation

Autorzy: Daniel Cantón, María T. Lázaro
Opublikowane w: 2024 7th Iberian Robotics Conference (ROBOT), 2024
Wydawca: IEEE
DOI: 10.1109/ROBOT61475.2024.10797435

Automating Construction Safety Inspections using Robots and Unsupervised Deep Domain Adaptation by Backpropagation

Autorzy: Velusamy Bharathi, Vimal; Prieto, Samuel; García de Soto, Borja; Teizer, Jochen
Opublikowane w: Proceedings of the International Symposium on Automation and Robotics in Construction (IAARC), 2024
Wydawca: The International Association for Automation and Robotics in Construction
DOI: 10.22260/ISARC2024/0111

Opportunities and challenges of press in piling for sustainable inner city quay wall development in Amsterdam

Autorzy: Kevin Duffy & Ken Gavin
Opublikowane w: Proceedings of the 3rd International Conference on Press-in Engineering 2024,, 2024, ISBN 978-4-909722-03-4
Wydawca: ICPE

Human-in-the-Loop Optimization of Active Back-Support Exoskeleton Assistance Via Lumbosacral Joint Torque Estimation

Autorzy: Andreas Sochopoulos, Tommaso Poliero, Darwin Caldwell, Jesús Ortiz, Christian Di Natali
Opublikowane w: 2023 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), 2023
Wydawca: IEEE
DOI: 10.1109/IROS55552.2023.10341810

The Smart Suit: a Novel Tool Platform for Learning and Assessment at Work

Autorzy: S Leggieri, P Sencandan, V Fanti, J Ahmad, DG Caldwell, C Di Natali
Opublikowane w: Automation, Robotics & Communications for Industry 4.0/5.0, 2025
Wydawca: Automation, Robotics & Communications for Industry 4.0/5.0
DOI: 10.13140/RG.2.2.13085.63208

Digital Twin for Construction Safety Modules in the Plan-Do-Check-Act Cycle of Events and Information Exchange

Autorzy: Johansen, K.W., Teizer, J.
Opublikowane w: Proceedings of the 41st International Conference of CIB W78, 2024, ISSN 2706-6568
Wydawca: CIB W78 2024 Conference

Simplifying Autonomous Aerial Operations: LUCAS, a Lightweight Framework for UAV Control and Supervision

Autorzy: J.I. Murillo; M.A. Montes; R. Zahinos; M.A. Trujillo; A. Viguria; G. Heredia
Opublikowane w: ICUAS, 2025, ISSN 2575-7296
Wydawca: IEEE

Proprioceptive-Based Control Strategy to Assist Walking and Carrying Tasks in Back-Support Exoskeletons

Autorzy: Vasco Fanti, Sergio Leggieri, Darwin G. Caldwell, Christian Di Natali
Opublikowane w: 2024 10th IEEE RAS/EMBS International Conference for Biomedical Robotics and Biomechatronics (BioRob), 2024
Wydawca: IEEE
DOI: 10.1109/BIOROB60516.2024.10719747

Navigating the Underground: Tackling Localization Challenges for UAVs in Tunnels

Autorzy: José M. González-Marín, Marco A. Montes-Grova, Francisco J. Pérez-Grau, Antidio Viguria
Opublikowane w: 2025 International Conference on Unmanned Aircraft Systems (ICUAS), 2025
Wydawca: IEEE
DOI: 10.1109/ICUAS65942.2025.11007869

Navigating the Underground: Tackling Localization Challenges for UAVs in Tunnels

Autorzy: José M. González-Marín, Marco A. Montes-Grova, Francisco J. Pérez-Grau, Antidio Viguria
Opublikowane w: 2025 International Conference on Unmanned Aircraft Systems (ICUAS), 2025, ISSN 2575-7296
Wydawca: IEEE
DOI: 10.1109/ICUAS65942.2025.11007869

State of the Art Review of Technological Advancements for Safe Tower Crane Operation

Autorzy: Avi Raj, Jochen Teizer
Opublikowane w: Proceedings of the International Symposium on Automation and Robotics in Construction (IAARC), Proceedings of the 41st International Symposium on Automation and Robotics in Construction, 2024
Wydawca: International Association for Automation and Robotics in Construction (IAARC)
DOI: 10.22260/ISARC2024/0048

Human-in-the-Loop Optimization of Active Back-Support Exoskeleton Assistance Via Lumbosacral Joint Torque Estimation

Autorzy: Sochopoulos, Andreas; Poliero, Tommaso; Caldwell, Darwin; Ortiz, Jesús; Di Natali, Christian
Opublikowane w: 2023 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), 2023
Wydawca: IEEE
DOI: 10.1109/IROS55552.2023.10341810

Realistic Unmanned Aerial Vehicle Simulation: A Comprehensive Approach

Autorzy: David Tejero-Ruiz; Francisco J. Pérez-Grau; Antidio Viguria; Aníbal Ollero
Opublikowane w: 2024 7th Iberian Robotics Conference (ROBOT), 2024
Wydawca: IEEE

Automatic Labeling for Thermal Imaging Datasets Generation

Autorzy: Daniel Cantón, María T. Lázaro
Opublikowane w: 2024 7th Iberian Robotics Conference (ROBOT), 2024, ISBN 979-8-3503-7636-4
Wydawca: IEEE
DOI: 10.1109/ROBOT61475.2024.10797435

Smart Signalperson for Safe Tower Crane Operations on a Future Digital Construction Site

Autorzy: Kilian Speiser, Jochen Teizer, and Ghulam Muhammad Ali
Opublikowane w: Proceedings of CIBW099W123 2024, 2024, ISBN 978-9988-3-9138-6
Wydawca: International Council for Research and Innovation in Building and Construction (CIB)

Automating Construction Safety Inspections using Robots and Unsupervised Deep Domain Adaptation by Backpropagation

Autorzy: Vimal Velusamy Bharathi, Samuel Prieto, Borja García de Soto, Jochen Teizer
Opublikowane w: Proceedings of the International Symposium on Automation and Robotics in Construction (IAARC), Proceedings of the 41st International Symposium on Automation and Robotics in Construction, 2024
Wydawca: International Association for Automation and Robotics in Construction (IAARC)
DOI: 10.22260/ISARC2024/0111

Worker-Centric Path Planning: Simulating Hazardous Energy to Control Construction Safety Using Graph Theory

Autorzy: Kilian Speiser, Jochen Teizer
Opublikowane w: Proceedings of the International Symposium on Automation and Robotics in Construction (IAARC), Proceedings of the 41st International Symposium on Automation and Robotics in Construction, 2024
Wydawca: International Association for Automation and Robotics in Construction (IAARC)
DOI: 10.22260/ISARC2024/0066

Pilot Test to Evaluate Ergonomic Risk of Industrial Exoskeleton with Semi-autonomous Method that Relies on AzKCLI and the Equivalent Weight

Autorzy: Christian Di Natali, Sergio leggieri, Vasco Fanti, Chiara Forgione, Antonio Maria Coruzzolo, Francesco Lolli, Darwin G. Caldwell
Opublikowane w: Springer Proceedings in Advanced Robotics, European Robotics Forum 2025, 2025
Wydawca: Springer Nature Switzerland
DOI: 10.1007/978-3-031-89471-8_21

Specific vs Generic Industrial Exoskeleton: Comparison on Muscle Activity Reduction – A Pilot Study

Autorzy: Vasco Fanti, Darwin G. Caldwell, Christian Di Natali
Opublikowane w: Biosystems & Biorobotics, Emerging Therapies in Neurorehabilitation III, 2025
Wydawca: Springer Nature Switzerland
DOI: 10.1007/978-3-031-85000-4_10

Pilot Test to Evaluate Ergonomic Risk of Industrial Exoskeleton with Semi-autonomous Method that Relies on AzKCLI and the Equivalent Weight

Autorzy: Christian Di Natali, Sergio leggieri, Vasco Fanti, Chiara Forgione, Antonio Maria Coruzzolo, Francesco Lolli, Darwin G. Caldwell
Opublikowane w: Springer Proceedings in Advanced Robotics, European Robotics Forum 2025, 2025
Wydawca: Springer Nature Switzerland
DOI: 10.1007/978-3-031-89471-8_21

Specific vs Generic Industrial Exoskeleton: Comparison on Muscle Activity Reduction – A Pilot Study

Autorzy: Vasco Fanti, Darwin G. Caldwell, Christian Di Natali
Opublikowane w: Biosystems & Biorobotics, Emerging Therapies in Neurorehabilitation III, 2025
Wydawca: Springer Nature Switzerland
DOI: 10.1007/978-3-031-85000-4_10

Automated rule-based safety inspection and compliance checking of temporary guardrail systems in construction

Autorzy: K.W. Johansen, J. Teizer, C. Schultz
Opublikowane w: Automation in Construction, Numer 168, 2024, ISSN 0926-5805
Wydawca: Elsevier BV
DOI: 10.1016/j.autcon.2024.105849

State of the Art Review of Technological Advancements for Safe Tower Crane Operation

Autorzy: Raj, Avi; Teizer, Jochen
Opublikowane w: Proceedings of the International Symposium on Automation and Robotics in Construction (IAARC), 2024, ISSN 2413-5844
Wydawca: 41st International Symposium on Automation and Robotics in Construction (ISARC 2024) 364
DOI: 10.22260/ISARC2024/0048

Knowledge graph exploitation to enhance the usability of risk assessment in construction safety planning

Autorzy: K.W. Johansen, C. Schultz, J. Teizer
Opublikowane w: Advanced Engineering Informatics, Numer 65, 2025, ISSN 1474-0346
Wydawca: Elsevier BV
DOI: 10.1016/J.AEI.2025.103305

Multi-Exoskeleton Performance Evaluation: Integrated Muscle Energy Indices to Determine the Quality and Quantity of Assistance

Autorzy: Vasco Fanti; Sergio Leggieri; Tommaso Poliero; Matteo Sposito; Darwin G. Caldwell; Christian Di Natali
Opublikowane w: Bioengineering, 2024, ISSN 2306-5354
Wydawca: Bioengineering
DOI: 10.3390/BIOENGINEERING11121231

Online Ergonomic Evaluation in Realistic Manual Material Handling Task: Proof of Concept

Autorzy: Sergio Leggieri; Vasco Fanti; Darwin G. Caldwell; Christian Di Natali
Opublikowane w: Bioengineering, 2023, ISSN 2306-5354
Wydawca: MDPI
DOI: 10.3390/BIOENGINEERING11010014

Framework for the adoption, evaluation and impact of occupational Exoskeletons at different technology readiness levels: A systematic review

Autorzy: Jamil Ahmad, Vasco Fanti, Darwin G. Caldwell, Christian Di Natali
Opublikowane w: Robotics and Autonomous Systems, Numer 179, 2024, ISSN 0921-8890
Wydawca: Elsevier BV
DOI: 10.1016/J.ROBOT.2024.104743

Human activity recognition algorithms for manual material handling activities

Autorzy: Andreas Sochopoulos, Tommaso Poliero, Jamil Ahmad, Darwin G. Caldwell & Christian Di Natali
Opublikowane w: Scientific Reports, Numer 15, 2025, ISSN 2045-2322
Wydawca: Springer Nature
DOI: 10.1038/S41598-024-81312-2

Scientific Reports

Autorzy: Andreas Sochopoulos; Tommaso Poliero; Jamil Ahmad; Darwin G. Caldwell; Christian Di Natali
Opublikowane w: Scientific Reports, 2025, ISSN 2045-2322
Wydawca: Nature
DOI: 10.1038/S41598-024-81312-2

Automated rule-based safety inspection and compliance checking of temporary guardrail systems in construction

Autorzy: Johansen, K.W.; Teizer, J.; Schultz, C.
Opublikowane w: Automation in Construction, 2024, ISSN 2706-6568
Wydawca: Elsevier
DOI: 10.1016/J.AUTCON.2024.105849

Formalizing virtual construction safety training: a schematic data framework enabling real-world hazard simulations using BIM and location tracking

Autorzy: Kilian Speiser, Jochen Teizer
Opublikowane w: Journal of Information Technology in Construction, Numer 29, 2024, ISSN 1874-4753
Wydawca: International Council for Research and Innovation in Building and Construction
DOI: 10.36680/j.itcon.2024.043

Dynamic and Static Assistive Strategies for a Tailored Occupational Back-Support Exoskeleton: Assessment on Real Tasks Carried Out by Railway Workers

Autorzy: Christian Di Natali; Tommaso Poliero; Vasco Fanti; Matteo Sposito; Darwin G. Caldwell
Opublikowane w: Bioengineering, 2024, ISSN 2306-5354
Wydawca: MDPI
DOI: 10.3390/bioengineering11020172

State of the Art Review of Technological Advancements for Safe Tower Crane Operation

Autorzy: Raj, Avi; Teizer, Jochen
Opublikowane w: Proceedings of the International Symposium on Automation and Robotics in Construction (IAARC), 2024, ISSN 2413-5844
Wydawca: The International Association for Automation and Robotics in Construction
DOI: 10.22260/ISARC2024/0048

Formalizing virtual construction safety training: a schematic data framework enabling real-world hazard simulations using BIM and location tracking

Autorzy: Speiser, Kilian; Teizer, Jochen
Opublikowane w: Journal of Information Technology in Construction, 2024, ISSN 1874-4753
Wydawca: ITcon
DOI: 10.36680/J.ITCON.2024.043

Dynamic and Static Assistive Strategies for a Tailored Occupational Back-Support Exoskeleton: Assessment on Real Tasks Carried Out by Railway Workers

Autorzy: Christian Di Natali; Tommaso Poliero; Vasco Fanti; Matteo Sposito; Darwin G. Caldwell
Opublikowane w: Bioengineering, 2024, ISSN 2306-5354
Wydawca: MDPI
DOI: 10.3390/BIOENGINEERING11020172

Online Ergonomic Evaluation in Realistic Manual Material Handling Task: Proof of Concept

Autorzy: Sergio Leggieri; Vasco Fanti; Darwin G. Caldwell; Christian Di Natali
Opublikowane w: Bioengineering, 2023, ISSN 2306-5354
Wydawca: MDPI
DOI: 10.3390/bioengineering11010014

Multi-Exoskeleton Performance Evaluation: Integrated Muscle Energy Indices to Determine the Quality and Quantity of Assistance

Autorzy: Vasco Fanti; Sergio Leggieri; Tommaso Poliero; Matteo Sposito; Darwin G. Caldwell; Christian Di Natali
Opublikowane w: Bioengineering, 2024, ISSN 2306-5354
Wydawca: MDPI
DOI: 10.3390/BIOENGINEERING11121231

Rezultaty

Publikacje

Udostępnij tę stronę Udostępnij tę stronę w mediach społecznościowych

Pobierz Pobierz zawartość strony