CORDIS oferuje możliwość skorzystania z odnośników do publicznie dostępnych publikacji i rezultatów projektów realizowanych w ramach programów ramowych HORYZONT.
Odnośniki do rezultatów i publikacji związanych z poszczególnymi projektami 7PR, a także odnośniki do niektórych konkretnych kategorii wyników, takich jak zbiory danych i oprogramowanie, są dynamicznie pobierane z systemu OpenAIRE .
Rezultaty
Investigating joints modelling techniques, considering the failure behaviour of multi-material joints; Selecting of suitable joining and micromechanics models of the bonded joints; Modelling and simulation of joints including failure assessment under crash loads.
Definition of procedures, viability and sustainability (odnośnik otworzy się w nowym oknie)Feasibility of mass-saving cost vs. structural performance of the developed BCFES/ACFES and asso-ciated developed materials; Identification of cost-effective manufacturing processes and technologi-cal constraints; Sustainability from the LCA perspective; recommendation on component prototype and preparation for production, allowing a minimum number of various realistic tests to be per-formed.
Full vehicle simulation assessment in mixed accident scenarios (odnośnik otworzy się w nowym oknie)Analysis of the crash and compatibility behaviour of the vehicles with the redesigned components; Configurations assessment (e.g. frontal, multi-angles crash); Comprehensive set of simulation runs including: Validation of the functional behavior of the developed FES-components in full vehicle crash scenarios; Evaluation of the functional performance and weight saving potential of the FES-components; Assessment of the safety level for the different FES-types in in standard Euro NCAP configurations and additional crash scenarios, derived from future mixed traffic accidents.
FES testing at the component level (odnośnik otworzy się w nowym oknie)Definition of the simplified tests at component level and tests performed to validate the trigger mechanism (TrM); Activation of the TrM and communication control with the ACFES system’s CAN based controller TrM; Results of different loading cases, tests and material cards validation.
Accidents and crash configurations of future vehicles in mixed traffic scenarios (odnośnik otworzy się w nowym oknie)Available accident data load case crash angles collision points overlapping with other vehicles will be used to build a more sophisticated tool to predict traffic scenarios with a special focus on light vehicles and mixed configurations between light vehicles and heavier vehicles Key factors influencing the SAV and AV driving behaviour are mapped in a literature review as well as the impact on safety conditions
PDER (updated version) (odnośnik otworzy się w nowym oknie)A final version of the dissemination and exploitation of project results detailing the target audience dissemination methodology editorial to schedule communications exploitation strategies definition of KPIs to measure success and a strategy to monitor progress A full strategy for digital communication and the visual identity of the project
Dissemination and communication activities (Year 1) (odnośnik otworzy się w nowym oknie)First annual report on communication and dissemination contains a rundown of all activities taken in the past year and serves at the same time in detailing the work plan for the upcoming year It offers the opportunity to check all KPIs in detail adjust editorials and modify communication strategies if needed
Open science and data management, sharing plan, and agreement (preliminary version) (odnośnik otworzy się w nowym oknie)Preliminary version of the Data Management Plan DMP Open sciences and data management plant Protecting the data while they are being collected processed analysed and backedup Ensuring that data obeys with legal regulations Regular reporting to the consortium Monitoring and evaluating database performance Improving the technology used building new databases
Multi-functional design and optimization of materials (odnośnik otworzy się w nowym oknie)A multilevel multifunctional optimization method for the developed materials including mechanical geometric thermal and acoustic attributes effects of processing on performance damage tolerance and lightweighting
Rate of production and economies of scale assessment (odnośnik otworzy się w nowym oknie)Micro-economic analysis contains an assessment of the development of technological processes; Realisation of the FES and verification of the feasibility of the technological processes, processability of the materials developed, and the actual cycle times achievable; Materials and production processes and related to this the viability of cost and production rates; Considering existing value chains and processes from the consortium partners to provide a real-world baseline for the assessment.
Dissemination and communication activities (Year 2) (odnośnik otworzy się w nowym oknie)Second annual report on communication and dissemination contains a run-down of all activities taken in the past year and serves at the same time in detailing the work plan for the upcoming year. It offers the opportunity to check all KPIs in detail, adjust editorials and modify communication strategies if needed.
LCA of identified vehicle's FES (odnośnik otworzy się w nowym oknie)Full LCA of the vehicle’s FES made with traditional materials and technologies and the ones made of the new proposed solutions; Sensitivity analysis to investigate the effect of changing factors (e.g. materials, manufacturing/joining processes) on the environmental impact.
Eco-design strategy for the structural components (odnośnik otworzy się w nowym oknie)A detailed design strategy and plan of the structural modules following the ecodesign principles considering both technical attributes and environmental economic and societal aspects complying with lifecycle principles
Exploitable results and exploitation activities (Year 2) (odnośnik otworzy się w nowym oknie)Second annual report of identification and definition of exploitable outputs and results of the project and their related business models for ensuring a successful market readiness stage beyond the project’s completion (> 2025).
Materials modelling and manufacturing process analysis (odnośnik otworzy się w nowym oknie)Developing of series of novel materials modelling constitutive laws (CLs), and their implementation in commercial software (e.g. LS-DYNA and RADIOSS); Analysis of quantification of uncertainty and model sensitivity; Modelling of manufacturing processes.
Exploitable results and exploitation activities (Year 1) (odnośnik otworzy się w nowym oknie)First annual report of identification and definition of exploitable outputs and results of the project and their related business models for ensuring a successful market readiness stage beyond the projects completion 2025
PDER (1st version) (odnośnik otworzy się w nowym oknie)A first draft of the dissemination and exploitation of project results detailing the target audience dissemination methodology editorial to schedule communications exploitation strategies definition of KPIs to measure success and a strategy to monitor progress A full strategy for digital communication and the visual identity of the project
Evaluation of materials characterizations (odnośnik otworzy się w nowym oknie)The methodology followed to determine the different properties of all developed materials Detailed information of the properties measured full testing and cauterization analysis and evaluations
Liaison report (1st ver.) (odnośnik otworzy się w nowym oknie)A preliminary mapping of relevant (at least 20) EU initiatives, platforms and networks that could help maximising SALIEN’s impact on EDC. Methodology for exchanging outputs and ideas is set up based on best practices, including communication among related stakeholders.
Prototyping of the selected BCFES/ACFES with highly integrated structural elements; Manufactur-ing and assembling using improved manufacturing technologies and several joining technologies; Recommendations on the applicability of FES and associated materials for sustainable and automated production; Optimising the process parameters for the manufacturing of the prototypes.
The Visual Identity Kit VIK comprises of the launch of a dedicated SALIENT website and social media profiles eg Twitter LinkedIn Youtube as well as the distribution of templates amongst the consortium partners presentations and written reports A full strategy of the visual identity
Publikacje
Autorzy:
Mohab Elmarakbi, Ahmed Elmasry, Yongqing Fu, Ahmed Elmarakbi
Opublikowane w:
Transport Transitions: Advancing Sustainable and Inclusive Mobility, 2026
Wydawca:
Springer Nature Switzerland
DOI:
10.5281/ZENODO.12605185
Autorzy:
Ghoniem, Engy; Ventosinos, Vanessa; Moldes Carballal, Miguel
Opublikowane w:
Transport Transitions: Advancing Sustainable and Inclusive Mobility. TRAconference 2024, 2025
Wydawca:
Springer, Cham
DOI:
10.5281/ZENODO.11518624
Autorzy:
Elmasry, Ahmed; Ghoniem, Engy; Azoti, Wiyao; Elmarakbi, Mohab; Yongqing, Fu; elmarakbi, ahmed
Opublikowane w:
FISITA World Congress, Sep 2023, Barcelona, Spain, 2023
Wydawca:
n.a.
DOI:
10.5281/zenodo.10638747
Autorzy:
Friederike L. Küh, José F. Papí
Opublikowane w:
Lecture Notes in Mobility, 2025
Wydawca:
Springer, Cham
DOI:
10.5281/ZENODO.13305842
Autorzy:
Elmarakbi, Mohab; Elmasry, Ahmed; Yongqing, Fu; elmarakbi, ahmed
Opublikowane w:
1st International Conference on Lightweight materials, 2023
Wydawca:
n.a.
DOI:
10.5281/zenodo.10638654
Autorzy:
Ghoniem, Engy; Elmasry, Ahmed; Azoti, Wiyao; Elmarakbi, Mohab; Yongqing, Fu; elmarakbi, ahmed
Opublikowane w:
1st International Conference on Lightweight materials, 2023
Wydawca:
n.a.
DOI:
10.5281/zenodo.10638789
Wyszukiwanie danych OpenAIRE...
Podczas wyszukiwania danych OpenAIRE wystąpił błąd
Brak wyników