SURE2COAT: SUSTAINABLE SURFACE TREATMENTS OF COMPLEX SHAPE COMPONENTS FOR TRANSSECTORIAL INDUSTRIAL INNOVATION

Informacje na temat projektu

SURE2COAT

Identyfikator umowy o grant: 101091982

DOI

10.3030/101091982

Projekt został zamknięty

Data podpisania przez KE 29 Listopada 2022

Data rozpoczęcia 1 Stycznia 2023

Data zakończenia 30 Kwietnia 2026

Finansowanie w ramach

• Digital, Industry and Space

Koszt całkowity

€ 5 905 509,00

Wkład UE

€ 5 905 508,25

Koordynowany przez

SINTEF AS
Norway

CORDIS oferuje możliwość skorzystania z odnośników do publicznie dostępnych publikacji i rezultatów projektów realizowanych w ramach programów ramowych HORYZONT.

Odnośniki do rezultatów i publikacji związanych z poszczególnymi projektami 7PR, a także odnośniki do niektórych konkretnych kategorii wyników, takich jak zbiory danych i oprogramowanie, są dynamicznie pobierane z systemu OpenAIRE .

Rezultaty

Documents, reports (11)

Final report on dissemination and communication activities

A report describing the implementation of dissemination and communication activities throughout the project, and compilation of all the project outputs will be prepared.

Report on the standardization landscape and applicable standards

A report describing available standards relevant for SURE2COAT will be elaborated.

Report on the contribution to standardization M9

A report based on SURE2COAT outputs as possible contributions for the elaboration of new standards will be prepared.

First draft of DCP

A draft of DCP will be elaborated and will be used as guideline for the implementation of dissemination and communication activities.

Common durability assessment procedure

Common durability assessment procedures for performance evaluation of shapes and surface treatments engineered in the project is to be developed in collaboration with research and industry partners. Common procedures will allow for component/coating durability evaluation under comparable and relevant conditions such as corrosive environments, exposure times, temperature regimes/thermal cycling.

LCC and E-LCA of ST technologies for all use cases M36

Updated version of deliverable 5.3

Cost-benefit analysis

A cost analysis will be completed to quantify the potential saving for each use case through the measured improvement on the different properties affecting their performance in terms of lifetime, heat transfer rate, and thermal conductivity thus minimising capital cost and maximising energy efficiency.

Preliminary report on dissemination and communication activities

A report describing the implementation of dissemination and communication activities and compilation of resulting outputs during the first 12 months of the project will be prepared.

Final report on linking and exploitation activities

A report detailing links to other national and international projects, and other EU initiatives related to SURE2COAT will be prepared.

Report on the contribution to standardization M36

A report based on SURE2COAT outputs as possible contributions for the elaboration of new standards will be prepared. Updated version of 6.11.

Report on the contribution to standardization M18

A report based on SURE2COAT outputs as possible contributions for the elaboration of new standards will be prepared. Updated version of 6.10.

Websites, patent fillings, videos etc. (1)

Public website up and running, and branded publishable material

Public website will be designed and built for Sure2Coat project.

Data Management Plan (1)

DMP

For compliance with Findable, Accessible, Interoperable and Reusable (FAIR) data, a DMP will be prepared.

Demonstrators, pilots, prototypes (1)

Sure2Coat production lines

This deliverable represents the actual Demonstrator of the project integration efforts at SIEM: starting from the technical design, the deployment of the Sure2Coat solutions will be carried out into a manufacturing environment. This involves the realisation of new hardware and software together with their integration with existing legacy systems. A cell/line dedicated to the ST and all the complementary operations will be deployed and tested to satisfy the expected specifications and KPIs.

Other (1)

Stakeholder workshop

Stakeholder workshop will be organised for research and industrial partners.

Publikacje

Book chapters (1)

10 - PEO-coated aluminum alloys with good thermal conductivity for TES applications

Autorzy: Anna Dmitruk, Natalia Raźny, Ting Wu, Maria Serdechnova, Krzystof Naplocha, Carsten Blawert
Opublikowane w: ISBN 978-0-323-99620-4
Wydawca: Elsevier
DOI: 10.1016/B978-0-323-99620-4.00010-5