Skip to main content
Vai all'homepage della Commissione europea (si apre in una nuova finestra)
italiano italiano
CORDIS - Risultati della ricerca dell’UE
CORDIS
Contenuto archiviato il 2024-06-18

BIOMECHATRONIC EPP UPPER LIMB PROSTHESIS

Obiettivo

Upper limb prostheses have made considerable scientific progress in the last 20 years. This progress though is based on velocity control, which is not the best option for subconscious control. Extended Physiological Proprioception (EPP) provides position control and has been proven to be better as a control methodology for upper-limb prostheses than velocity control. EPP is difficult to implement since it requires: (a) the use of a harness or a post-amputation cineplasty surgical procedure and (b) a direct mechanical linkage (Bowden cable) between the control site and the prosthesis. For the above shortcomings, EPP was abandoned in the later years. We propose a biomechatronics-based master/slave topology which is going to provide an EPP-equivalent control but without the use of a harness, cineplasty, or Bowden cable. The proposed control uses an implanted tendon force and position transducer (TETRA) in series to specific muscles/tendons implanted at the time of amputation, providing an input source for the commanding signal. This signal - conditioned inside the body - is transmitted wirelessly to the Master Motor Controller which will drive the prosthesis proportionally to the commanding signal. Position, velocity and force sensors on the prosthesis will be inputs to the Slave Motor Controller which will provide as output a tactor proprioceptive feedback on the skin of the amputated limb proportional to the position, velocity and force of the prosthesis. This output from the tactor is going to be integrated by the skin mechanoreceptors of the skin of the amputee and will provide a proprioceptive feedback status of the prosthesis which will be integrated subconsciously by the human and taken into account at the next commanding signal stemming from the position, velocity and force of the contracted muscletendon complex. This architecture will provide an integrated EPP-equivalent control scheme for upper-limb prosthesis without the disadvantages of previous EPP config.

Campo scientifico (EuroSciVoc)

CORDIS classifica i progetti con EuroSciVoc, una tassonomia multilingue dei campi scientifici, attraverso un processo semi-automatico basato su tecniche NLP. Cfr.: Il Vocabolario Scientifico Europeo.

È necessario effettuare l’accesso o registrarsi per utilizzare questa funzione

Argomento(i)

Gli inviti a presentare proposte sono suddivisi per argomenti. Un argomento definisce un’area o un tema specifico per il quale i candidati possono presentare proposte. La descrizione di un argomento comprende il suo ambito specifico e l’impatto previsto del progetto finanziato.

Invito a presentare proposte

Procedura per invitare i candidati a presentare proposte di progetti, con l’obiettivo di ricevere finanziamenti dall’UE.

FP7-PEOPLE-2012-CIG
Vedi altri progetti per questo bando

Meccanismo di finanziamento

Meccanismo di finanziamento (o «Tipo di azione») all’interno di un programma con caratteristiche comuni. Specifica: l’ambito di ciò che viene finanziato; il tasso di rimborso; i criteri di valutazione specifici per qualificarsi per il finanziamento; l’uso di forme semplificate di costi come gli importi forfettari.

MC-CIG - Support for training and career development of researcher (CIG)

Coordinatore

ETHNICON METSOVION POLYTECHNION
Contributo UE
€ 100 000,00
Indirizzo
HEROON POLYTECHNIOU 9 ZOGRAPHOU CAMPUS
157 72 ATHINA
Grecia

Mostra sulla mappa

Regione
Αττική Aττική Κεντρικός Τομέας Αθηνών
Tipo di attività
Higher or Secondary Education Establishments
Collegamenti
Costo totale

I costi totali sostenuti dall’organizzazione per partecipare al progetto, compresi i costi diretti e indiretti. Questo importo è un sottoinsieme del bilancio complessivo del progetto.

Nessun dato
Il mio fascicolo 0 0