Skip to main content
Przejdź do strony domowej Komisji Europejskiej (odnośnik otworzy się w nowym oknie)
polski polski
CORDIS - Wyniki badań wspieranych przez UE
CORDIS
Zawartość zarchiwizowana w dniu 2024-06-18

Software-defined energy-efficient Photonic transceivers IntRoducing Inteligence and dynamicity in Terabit superchannels for flexible optical networks

Opis projektu

The Challenge:
The advent of cloud applications and the proliferation of mobile devices have imposed a dramatic increase of the IP traffic. The emerging ZetaByte Era forces operators to seek a cost-efficient way of upgrading their network in order to accommodate the vast amount of data without compromising QoS and wasting bandwidth resources. Technology paradigms shift towards coherent modulation formats for upgrading channel capacity, yet at the cost of power-hungry DSP residing outside the transceiver line cards and bulky component configurations. What is more, current implementations rely on fixed-grid network elements ignoring efficient spectrum management that can benefit from high-order QAM modulation.

Vision:
SPIRIT aims to build a fully programmable transceiver in a single package for Terabit optical transport networks capable of superchannel grooming on a gridless basis and SDN functionality on board. The new transceiver technology platform targets power and cost savings up to 50%.

Project Objectives:
SPIRIT aims to fulfill the existing telecommunication gap with a near-to-market transceiver product merging the benefits of high performance and mature photonic and electronic technologies into a single platform. In order to achieve its mission, SPIRIT has defined the following ambitious objectives:

  • Fabrication of high-speed, low-voltage drive, InP modulators with segmented electrodes
    Fabrication of low-power CMOS Periodically Amplified Travelling-wave Hybrid (PATH) modulator logic and driver arrays
    Fabrication of an optical MUX/DEMUX based on tunable Si micro-ring filter arrays for superchannel grooming on a gridless basis
    Development of fully-programmable, high-speed, low-power, integrated photonic and electronic flexible transceivers
    Fixed-grid and gridless 400G, 1T and flexible (super)channel data transport with advanced DSP and monitoring built-in functions enabled by software control

Bandwidth‐hungry end‐user applications are stretching physical layer capacity and dictating the migration towards software-defined flexible architectures. Fully-programmable optical components supporting rate- and format-adaptation are urgently needed.SPIRIT will fabricate low-cost, energy-efficient flexible transceivers that are capable of gridless operation and are compatible with both current and future applications. Single- and multi-carrier (OFDM) QAM formats will be supported up to a spectral efficiency of 16 bits/s/Hz (DP-256-QAM), for throughputs of up to 1Tbit/s from a single-package transceiver. Interfacing to an external FPGA will allow dynamic adjustment of the symbol rate (up to 32GBaud) and modulation format. Novel segmented-electrode InP IQ-MZMs with Vπ≈1V will be developed. This allows direct digital drive using mature, high-yield CMOS electronics; SPIRIT will therefore benefit from the dominant technology in IC fabrication, constituting a cost-effective, ultra-low-power solution. On‐chip, 5-bit multi-level functionality will enable arbitrary optical waveform generation and transmitter-side DSP. Record-low power consumption (1.8W per MZM arm) for a device of this resolution is targeted. Compared to current transmitters, more than 50% power consumption reduction is expected for 400G and 1T applications.The CMOS electronics and InP photonics will be integrated on a SOI platform, including coherent receivers and a novel, flexible MUX/DEMUX based on micro-ring filters, enabling spectrally efficient aggregation/segmentation of superchannels. The latter will be tunable across the entire C-band for truly gridless operation and fine-granularity spectrum slicing.SPIRIT will introduce intelligence in the optical layer. It envisages development of a software-defined network emulation platform that includes DSP performance monitoring for QoS management at the physical layer.Participation by industry leaders ensures a clear commercial exploitation path.

Dziedzina nauki (EuroSciVoc)

Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: Europejski Słownik Naukowy.

Aby użyć tej funkcji, musisz się zalogować lub zarejestrować

Program(-y)

Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.

Temat(-y)

Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.

Zaproszenie do składania wniosków

Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.

FP7-ICT-2013-11
Zobacz inne projekty w ramach tego zaproszenia

System finansowania

Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.

CP - Collaborative project (generic)

Koordynator

EREVNITIKO PANEPISTIMIAKO INSTITOUTO SYSTIMATON EPIKOINONION KAI YPOLOGISTON
Wkład UE
€ 585 281,00
Koszt całkowity

Ogół kosztów poniesionych przez organizację w związku z uczestnictwem w projekcie. Obejmuje koszty bezpośrednie i pośrednie. Kwota stanowi część całkowitego budżetu projektu.

Brak danych

Uczestnicy (7)

Moja broszura 0 0