Cel
The objective of ROCCO is to develop a robot assembly system for masonry construction. The robot will be used to assemble prefabricated blocks that are joinable without conventional mortar. The robotic system will be integrated into a complete computer-based construction system including programming and control facilities.
Two manipulators will be developed: one with a working height of 3.5 metres for house-building, and the other with a 10-metre working height for industrial construction. Supporting vehicles, sensors, grippers and control systems will be developed within the project. A particular problem which will be tackled is combining automatic and manual telemanipulation of the robot, including switching between the two.
Programming and simulation will include:
- enhancement to existing wall partitioning software to generate plans describing the position of blocks in the wall
- planning the layout of blocks on palettes
- assembly sequence planning
- robot planning based on CAD data.
The control will include sensor integration and on-line compensation as well as a high sophisticated user interface.
A pilot demonstration is foreseen at a lime-sand brick manufacturer and at a construction site for industrial buildings. Exploitation of the results will be achieved through several members of the consortium who supply equipment to the construction industry.
Dziedzina nauki
Not validated
Not validated
- natural sciencescomputer and information sciencessoftware
- engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringcontrol systems
- engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensors
Temat(-y)
Data not availableZaproszenie do składania wniosków
Data not availableSystem finansowania
Data not availableKoordynator
88410 BAD WURZACH
Niemcy