Development of a Novel, Intelligent Down the Hole Disconnect Tool

Informacje na temat projektu

I-DISC

Identyfikator umowy o grant: 666412

DOI 10.3030/666412

Projekt został zamknięty

Data podpisania przez KE 8 Kwietnia 2015

Data rozpoczęcia 1 Kwietnia 2015

Data zakończenia 30 Listopada 2017

Finansowanie w ramach

• SOCIETAL CHALLENGES - Food security, sustainable agriculture and forestry, marine, maritime and inland water research, and the bioeconomy

Koszt całkowity € 2 683 138,75

Wkład UE € 1 876 447,13

Koordynowany przez

CUTTING & WEAR RESISTANT DEVELOPMENTS LIMITED
United Kingdom

Cel

A Bottom hole assembly (BHA) is a series of components that form the lower part of the drill string, extending from the bit to the drill pipe. During oil and gas exploration the BHA can become stuck/jammed due to poor cleaning of the hole and subsequent build-up of cuttings. With direction drilling programmes now exceeding 10km, problems are becoming more common and expensive as oil exploration companies look to access difficult to extract oil reserves from reservoirs which until recently were not commercially viable, particularly in deep water. Methods of disconnecting the BHA need to be activated in highly deviated or horizontal wells where wireline systems cannot easily be employed. In development and exploration drilling, the costs when the BHA becomes stuck down the hole are considerable.

The aim of the I-DISC project is to design, develop and ready for market a high temperature variant of a novel intelligent down the hole disconnect tool (I-DISC) which, in the case of a stuck bottom hole assembly (BHA), would provide disconnection from the BHA and extraction in less than a tenth of the time of the existing state of art methods. Integral to the disconnect feature is a circulation valve (I-CIRC) that enhances the products capability to mitigate becoming stuck in the first place.

Dziedzina nauki

• agricultural sciences › agriculture, forestry, and fisheries › fisheries
• engineering and technology › electrical engineering, electronic engineering, information engineering › electronic engineering › control systems
• engineering and technology › electrical engineering, electronic engineering, information engineering › electronic engineering › computer hardware › computer processors
• social sciences › sociology › governance › crisis management

Program(-y)

• H2020-EU.3.2. - SOCIETAL CHALLENGES - Food security, sustainable agriculture and forestry, marine, maritime and inland water research, and the bioeconomy Main Programme
• H2020-EU.2.3.1. - Mainstreaming SME support, especially through a dedicated instrument

Temat(-y)

• BG-12-2014 - Supporting SMEs efforts for the development - deployment and market replication of innovative solutions for blue growth

Zaproszenie do składania wniosków

H2020-SMEInst-2014-2015

Zobacz inne projekty w ramach tego zaproszenia

Szczegółowe działanie

H2020-SMEINST-2-2014

System finansowania

SME-2 - SME instrument phase 2

Koordynator

CUTTING & WEAR RESISTANT DEVELOPMENTS LIMITED

• Wkład UE netto: € 1 876 447,13
• Adres: 7 COWLEY WAY SMITHY WOOD ECCLESFIELD ; S35 1QP SHEFFIELD ; Zjednoczone Królestwo
• MŚP Organizacja określiła się jako MŚP (firma z sektora małych i średnich przedsiębiorstw) w czasie podpisania umowy o grant. Tak:
  Region
  Yorkshire and the Humber › South Yorkshire › Sheffield
• Region: Yorkshire and the Humber › South Yorkshire › Sheffield
• Rodzaj działalności: Private for-profit entities (excluding Higher or Secondary Education Establishments)
• Koszt całkowity: € 2 683 138,75