Skip to main content
Przejdź do strony domowej Komisji Europejskiej (odnośnik otworzy się w nowym oknie)
polski polski
CORDIS - Wyniki badań wspieranych przez UE
CORDIS

Adding Simulation to the Corporate ENvironmenT for Additive Manufacturing

CORDIS oferuje możliwość skorzystania z odnośników do publicznie dostępnych publikacji i rezultatów projektów realizowanych w ramach programów ramowych HORYZONT.

Odnośniki do rezultatów i publikacji związanych z poszczególnymi projektami 7PR, a także odnośniki do niektórych konkretnych kategorii wyników, takich jak zbiory danych i oprogramowanie, są dynamicznie pobierane z systemu OpenAIRE .

Rezultaty

Model Interaction (odnośnik otworzy się w nowym oknie)

"Data transfer between detailed and global model is realized and validated. (Evaluation Of sensitivity of the assumption ""combination of many layers"" in the global model)"

Demand for Material Characterization documented (odnośnik otworzy się w nowym oknie)

Demand on additional material characterization assessed. Dependent on the used model for filigree structures and interdependencies of powder/platform/part.

Report on the signature of the Implementation Agreement (odnośnik otworzy się w nowym oknie)

Required by JU.

Definition of the softare environment (odnośnik otworzy się w nowym oknie)

The framework is defined. This includes the definition of open sources programmes for every simulation module as well as for all necessary interfaces.

Final Communication, dissemination and exploitation plan and summary (odnośnik otworzy się w nowym oknie)

Required by JU.

Heat Treatment Simulation (odnośnik otworzy się w nowym oknie)

Remaining distortions after heat treatment and separation from build platform can be calculated (incl. validation). Study on relevance of creep during build process validated.

Creep Model (odnośnik otworzy się w nowym oknie)

Creep mechanism can be modeled. Stress relief anneal process step of manufacturing chain can be calculated. Ability to evaluate remaining residual stresses after heat treatment (annealing) potential / risk for increase or reduction of mechanical Ioad capacity.

Model Reengineering (odnośnik otworzy się w nowym oknie)

Reengineered model successful. Measured and simulated distortions can be used for reengineering (First time right manufacturing of AM Parts)

Calculation Acceleration Methods (odnośnik otworzy się w nowym oknie)

Possibility of calculation of multiple components on building platform and mutual influence is demonstrated. Calculation time for a reference job is in the range or lower than building time. Possibility of simulation of complex, filigree structures leading to very high FE element numbers is demonstrated.

Publikacje

Continuous verification and validation in simulation of additive manfucturing

Autorzy: Bayerlein and Michael F. Zaeh
Opublikowane w: 2018
Wydawca: ECCOMAS

LBM-specific direct solver strategy for the quasilinear heat equation

Autorzy: Christian Zeller1, and Michael F. Zaeh1
Opublikowane w: 2018
Wydawca: ECCOMAS

Adaption of Numerical Methods to the Specific Requirements of the Thermal Simulation in Laser Beam Melting

Autorzy: Zeller
Opublikowane w: 2019
Wydawca: mediaTUM

Managing Form Deviation in Laser Beam Melting by Pre-Deformation

Autorzy: Bayerlein
Opublikowane w: 2020
Wydawca: mediaTUM

Parameterized Extended Finite Element Method for high thermal gradients (odnośnik otworzy się w nowym oknie)

Autorzy: Christian Zeller, Binu Surendran, Micheal F. Zaeh
Opublikowane w: Journal of Computational Design and Engineering, Numer 5/3, 2017, Strona(/y) 329-336, ISSN 2288-5048
Wydawca: Elsevier
DOI: 10.1016/j.jcde.2017.12.001

Wyszukiwanie danych OpenAIRE...

Podczas wyszukiwania danych OpenAIRE wystąpił błąd

Brak wyników

Moja broszura 0 0