Opis projektu
Lepsze osiągi silników turbośmigłowych dzięki innowacyjnym rdzeniom i systemom sterowania
Rdzeń ARDIDEN3 został pierwotnie zaprojektowany z myślą o silnikach turbospalinowych. Celem finansowanego ze środków UE projektu PROPCONEL jest przystosowanie rozwiązania ARDIDEN3 do nowego zastosowania, jakim są silniki turbośmigłowych samolotów krótkiego zasięgu wykorzystywanych w lotnictwie komercyjnym. Niezbędne prace obejmą przeprojektowanie komory spalania, turbiny, układu wydechowego i systemu sterowania, aby elementy te lepiej spełniały wymagania silników turbośmigłowych. Rdzeń zostanie zintegrowany z innowacyjną skrzynią biegów, wlotem powietrza oraz zaawansowanym, „bardziej elektrycznym” układem sterowania śmigłem, złożonym z jednostki sterującej śmigłem, regulatora nadmiernej prędkości i pomocniczej pompy olejowej. Po określeniu specyfikacji projektu i wyprodukowaniu komponentów systemu sterowania zespół projektu PROPCONEL przystąpi do przeprowadzenia rygorystycznych testów swojego rozwiązania.
Cel
The project proposal is aimed in category of Business Aviation/Short Range turboprop engines. The baseline core of ARDIDEN3 will be improved with focus, first of all upon combustion chamber for higher altitude operation, specific turbine and propulsive exhaust and specific control system. This way it will better fit with turboprop application. For this purpose the ARDIDEN3 core will be integrated with an innovative gear box, air inlet and advanced more electric propeller control system.
Objective of the project proposal is to research, design, manufacture test and verify a new advanced, more electric propeller control system consisting of Propeller Control Unit, Overspeed Governor and Auxiliary Oil Pump, useful for operational conditions of the improved Turboprop engine developed by Turbomeca.
The objective will be achieved by the following steps:
1. Definition of propeller control system design specifications with respect to the increased level of power influences due to the specific characteristic of the improved Turboprop engine.
2. Design of the Propeller Control Unit, Overspeed Governor and Auxiliary Oil Pump.
3. Production of the Propeller Control System equipment.
4. Testing of the Propeller Control Unit, Overspeed Governor and Auxiliary Oil Pump within internal testing procedures, and validation within environmental external testing and verification directly on the Turboprop engine demonstrator, in order to demonstrate the achievements.
Based on the dynamic modeling, research and verification the new technical specifications will be established. Based on them a suitable, advanced more electric propeller control system will be designed, produced and tested.
JIHOSTROJ is a company experienced and approved for design and production of propeller governors.
VZLU is a research and testing establishment with more than 90 years of experience and tradition in aerospace activities.
Dziedzina nauki
- natural sciencescomputer and information sciencessoftware
- engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringcontrol systems
- engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraftrotorcraft
- engineering and technologyenvironmental engineeringenergy and fuels
- social scienceslaw
Program(-y)
Temat(-y)
Zaproszenie do składania wniosków
Zobacz inne projekty w ramach tego zaproszeniaSystem finansowania
CS2-IA - Innovation actionKoordynator
382 32 VELESIN
Czechy