New Hybrid Thermoplastic Composite Aerostructures manufactured by Out of Autoclave Continuous Automated Technologies

Rezultaty

Communication Pack for the project legacy

This deliverable will include the dissemination materials which will be used by all partners in events performed after the end of the project.

Technical/Economical benefit assessment report

Outputs of this deliverable, responsibility of UPAT, is a fully parametric cost analysis of the manufacturing/welding processes under development, optimal set of process parameters which leads to minimum cost that satisfies the design and quality requirements, along with the allowable process windows for each process, as well as proposal for critical concept reviews on the possible modification to be applied to consolidate the process at industrial level.

First technology benefit assessment report

Outputs of this deliverable, responsibility of FNM will be a first technology benefit assessment report including a comparison between costs/savings for processing and performance of the new material.

Engineering evaluation of test results

Outputs of this deliverable, responsibility of FNM will be a final engineering evaluation report for all the chain of manufacturing processes involved in NHYTE process.

Identification of the Demonstrators

At first, a technology representative demonstrator will be selected based on previous experiences on conventional composite aero-structures. Then, it will be provided a documentation including all the potential advantages & improvements achievable in terms of weight savings and manufacturing cost flows, by using the automated chain of processes (AFP ISC, IW, CCM) herein proposed.

Initial Communication Pack

The initial communication pack will include the project logo, poster, leaflet, presentation and deliverable templates.

Public website and Social Media groups

The NHYTE public website and the project’s social media groups will provide information about the project, its objectives, challenges, and expected results. In addition, they will be regularly updated with the project’s progress and achievements keeping constantly updated the “NHYTE Community”.

Publikacje

A nonlinear ultrasonic hybrid modulation subtraction method for structural health monitoring using sparse arrays

Autorzy: Gian Piero Malfense Fierro, Michele Meo
Opublikowane w: Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, Civil Infrastructure, and Transportation IX, Numer Volume 11380, 2020, Strona(/y) 56, ISBN 9781510635388
Wydawca: SPIE
DOI: 10.1117/12.2559063

Damage localization on composite structures: radial basis function application

Autorzy: Stefano Cuomo, Gian Piero M. Fierro, Michele Meo
Opublikowane w: Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, Civil Infrastructure, and Transportation IX, 2020, Strona(/y) 12, ISBN 9781510635388
Wydawca: SPIE
DOI: 10.1117/12.2559213

Non-destructive thermography-based system for damage localisation and characterisation during induction welding of thermoplastic composites

Autorzy: Francesco Flora, Marco Boccaccio, Gian Piero Malfense Fierro, Michele Meo
Opublikowane w: Thermosense: Thermal Infrared Applications XLII, 2020, Strona(/y) 19, ISBN 9781510635968
Wydawca: SPIE
DOI: 10.1117/12.2564925

Hybrid semicrystalline-amorphous thermoplastic composites for aeronautical applications

Autorzy: Michele Iannone
Opublikowane w: AIP Conference Proceedings volume 1981, Numer Numer 1, 2018, Strona(/y) 020038, ISBN 978-0-7354-1697-0
Wydawca: AIP Publishing LLC
DOI: 10.1063/1.5045900

Processing of PEEK/PEI blends for high performance composites in aerospace

Autorzy: Michele Iannone, Alberto D’Amore
Opublikowane w: THE 9TH INTERNATIONAL CONFERENCE ON STRUCTURAL ANALYSIS OF ADVANCED MATERIALS - ICSAAM 2019, Numer Volume 2196, Numer 1, 2019, Strona(/y) 020019, ISBN 978-0-7354-1947-6
Wydawca: AIP Publishing
DOI: 10.1063/1.5140292

THERMAL WAVE IMAGING FOR DEFECT DETERMINATION DURING AUTOMATED FIBRE PLACEMENT

Autorzy: GIAN PIERO MALFENSE FIERRO, FRANCESCO FLORA, MICHELE MEO
Opublikowane w: STRUCTURAL HEALTH MONITORING 2019 ENABLING INTELLIGENT LIFE-CYCLE HEALTH MANAGEMENT FOR INDUSTRY INTERNET OF THINGS (IIOT), Numer November 2019, 2019, ISBN 978-1-60595-601-5
Wydawca: DEStech Publishing
DOI: 10.12783/shm2019/32369

STRUCTURAL HEALTH MONITORING FOR DAMAGE LOCALIZATION AND IMAGING USING A LINEAR AND NONLINEAR ULTRASOUND SUBHARMONIC AND MODULATION METHOD

Autorzy: GIAN PIERO MALFENSE FIERRO, SALVATORE BOCCARDI, MICHELE MEO
Opublikowane w: Structural Health Monitoring 2019 Enabling Intelligent Life-cycle Health Management for Industry Internet of Things (IIOT), Numer November 2019, 2019, ISBN 978-1-60595-601-5
Wydawca: DEStech Publishing
DOI: 10.12783/shm2019/32169

A nonlinear ultrasonic SHM method for impact damage localisation in composite panels using a sparse array of piezoelectric PZT transducers

Autorzy: Christos Andreades, Gian Piero Malfense Fierro, Michele Meo
Opublikowane w: Ultrasonics, Numer Volume 108, December 2020, 106181, 2020, ISSN 0041-624X
Wydawca: Elsevier BV
DOI: 10.1016/j.ultras.2020.106181

Comparative Environmental and Cost Analysis of Alternative Production Scenarios Associated with a Helicopter’s Canopy

Autorzy: Christos V. Katsiropoulos, Andreas Loukopoulos, Spiros G. Pantelakis
Opublikowane w: Aerospace, Numer 6/1, 2019, Strona(/y) 3, ISSN 2226-4310
Wydawca: MDPI
DOI: 10.3390/aerospace6010003

Automated fabrication of hybrid thermoplastic prepreg material to be processed by In-Situ Consolidation Automated Fiber Placement process

Autorzy: Vincenzo Iannone, Marco Barile, Leonardo Lecce
Opublikowane w: MATEC Web of Conferences, Numer 188, 2018, Strona(/y) 01024, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201818801024

Life cycle assessment and cost analysis evaluation of a helicopter's canopy production using different manufacturing processes

Autorzy: Andreas Loukopoulos, Christos Katsiropoulos, Spiros Pantelakis
Opublikowane w: MATEC Web of Conferences, Numer 188, 2018, Strona(/y) 01020, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201818801020

Environmental and financial performance evaluation of a helicopter's canopy production using different materials and manufacturing processes

Autorzy: Ch.V.Katsiropoulos; A.Loukopoulos; Sp.G. Pantelakis
Opublikowane w: MATEC Web Conf. 8th EASN-CEAS International Workshop on Manufacturing for Growth & Innovation, Numer Volume 233, 2018, ISSN 2261-236X
Wydawca: EDP Sciences
DOI: 10.1051/matecconf/201823300004

Simulation of laser heating distribution for a thermoplastic composite: effects of AFP head parameters

Autorzy: Omar Baho, Gilles Ausias, Yves Grohens, Julien Férec
Opublikowane w: The International Journal of Advanced Manufacturing Technology, Numer 110/7-8, 2020, Strona(/y) 2105-2117, ISSN 0268-3768
Wydawca: Springer Verlag
DOI: 10.1007/s00170-020-05876-9

Thermoplastic Composites for Aerospace Applications

Autorzy: Marco Barile, Leonardo Lecce, Michele Iannone, Silvio Pappadà, Pierluca Roberti
Opublikowane w: Revolutionizing Aircraft Materials and Processes, 2020, Strona(/y) 87-114, ISBN 978-3-030-35345-2
Wydawca: Springer International Publishing
DOI: 10.1007/978-3-030-35346-9_4

A challenge for next A/C Fuselage: New Hybrid Thermoplastic Material, Testing activities definition

Autorzy: Antonietta Mormone; Marco Raffone; Salvatore Russo
Opublikowane w: "8th EASN-CEAS International Workshop on ""Manufacturing for Growth & Innovation", Numer 1, 2018
Wydawca: Conference paper
DOI: 10.5281/zenodo.3819812

Wyszukiwanie danych OpenAIRE...

Rezultaty

Publikacje

Udostępnij tę stronę

Pobierz