Development of innovative lightweight and highly insulating energy efficient components and associated enabling materials for cost-effective retrofitting and new construction of curtain wall facades

Rezultaty

Requirements and drivers of EENSULATE module

The deliverable will collect the results from Task 1.1 about standards and regulations requirements and Task 1.2 about market analysis outcomes.

IPR manual

Pre-existing knowledge definition, mapping of existing patents, potentially overlapping IPR, assessment of the project results and its IPR, optimal IPR protection options, recommendations.

EENSULATE Foam characterisation and durability

Report on the EENSULATE Foam material characterisation and durability assessment. The deliverable will collect all the main EENSULATE Foam properties.

Installation at demo sites

This document will include the detailed constructive design of the retrofitting for the demo buildings.

Initial Exploitation Plan

Identification of the key exploitable results, exploitation forms to take, conditions enabling exploitation of the results, competition, risk analysis, potential obstacles to future exploitation of project’s results. Appropriate quantitative indicators to assess the cost reduction will be included in the Exploitation Plan.

Communication and Dissemination Plan

Dissemination and Communication Plan will identify roles and responsibilities of partners and outline the target audiences, key messages, communication channels, tools and timelines allowing a holistic exploitation of project results.

Concept design of EENSULATE module

The deliverable collects the first results from Tasks 1.3, 1.4 and 1.5 and drafts a set of target solutions for the EENSULATE module as indicators for WP2 and WP3.

Report on Training activities

Report describing training activities within the project.

Retrofit process application at the individual testing sites

This document will include the detailed constructive design of the retrofitting for the demo buildings.

Evaluation of sustainability and replicability

This deliverable will contain the results coming out from LCA and LCC analysis, including validation report of lowered embodied energy and effectiveness of the proposed solutions to reach an increased rate of renovation.

Development of installation, commissioning and maintenance guidelines

This document will include guidelines for design, installation, commissioning and maintenance of the EENSULATE components.

Prototypes characterization and durability testing

This report include details about the results coming out from the prototype characterization as well as the durability tests carried out in Task 3.6. In the framework of this deliverable, the small size (300 x 300 mm) optimized ‘Premium eensulate prototype incorporating thermotunable coatings for complete characterizations will be delivered.

Outcomes of testing activities

This report, summarizing the results of Task 4.4, will include details about the performed tests and the identified upgrades to be implemented in the EENSULATE facade system to fix the weak points improving the final product.

Promo material creation

Communication toolkit: Project presentation, brochure, roll-up poster, e-newsletter design

Website creation

Website will be designed for both private and public access, hosted by FENIX. Regular update and maintenance every month.

Policy workshops and awareness campaign

Report assessing policy workshops organization and awareness campaign success.

Prototypes for testing in relevant environment

Report summarizing the results of Task 4.2 about the manufacturing of the full scale prototypes according to the specifications.

Publikacje

Effect of layered double hydroxide, expanded graphite and ammonium polyphosphate additives on thermal stability and fire performance of polyisocyanurate insulation foam

Autorzy: Eleni Asimakopoulou, Jianping Zhang, Maurice Mckee, Kinga Wieczorek, Anna Krawczyk, Michele Andolfo, Tomasz Kozlecki, Marco Scatto, Michele Sisani, Maria Bastianini, Anastasios Karakassides, Pagona Papakonstantinou
Opublikowane w: Thermochimica Acta, Numer 693, 2020, Strona(/y) 178724, ISSN 0040-6031
Wydawca: Elsevier BV
DOI: 10.1016/j.tca.2020.178724

The Integration of Vacuum Insulated Glass in Unitized Façade for the Development of Innovative Lightweight and Highly Insulating Energy Efficient Building Envelope—The Results of Eensulate Façade System Design

Autorzy: Alessandro Pracucci, Sara Magnani, Oscar Casadei
Opublikowane w: Designs, Numer 4/4, 2020, Strona(/y) 40, ISSN 2411-9660
Wydawca: Designs Journal Published by MDPI
DOI: 10.3390/designs4040040

Combined Effect of Temperature Induced Strain and Oxygen Vacancy on Metal‐Insulator Transition of VO 2 Colloidal Particles

Autorzy: Kargal L Gurunatha, Sanjayan Sathasivam, Jianwei Li, Mark Portnoi, Ivan P. Parkin, Ioannis Papakonstantinou
Opublikowane w: Advanced Functional Materials, Numer 30/49, 2020, Strona(/y) 2005311, ISSN 1616-301X
Wydawca: John Wiley & Sons Ltd.
DOI: 10.1002/adfm.202005311

Optimization of the thermochromic glazing design for curtain wall buildings based on experimental measurements and dynamic simulation

Autorzy: Marco Arnesano, Giuseppe Pandarese, Milena Martarelli, Federica Naspi, Kargal L. Gurunatha, Christian Sol, Mark Portnoi, Francisco V. Ramirez, Ivan P. Parkin, Ioannis Papakonstantinou, Gian Marco Revel
Opublikowane w: Solar Energy, Numer 216, 2021, Strona(/y) 14-25, ISSN 0038-092X
Wydawca: Pergamon Press Ltd.
DOI: 10.1016/j.solener.2021.01.013

Atomic layer deposition of vanadium oxides: process and application review

Autorzy: V.P. Prasadam, N. Bahlawane, F. Mattelaer, G. Rampelberg, C. Detavernier, L. Fang, Y. Jiang, K. Martens, I.P. Parkin, I. Papakonstantinou
Opublikowane w: Materials Today Chemistry, Numer 12, 2019, Strona(/y) 396-423, ISSN 2468-5194
Wydawca: Elsevier
DOI: 10.1016/j.mtchem.2019.03.004

Improved thermochromic properties in bilayer films of VO 2 with ZnO, SnO 2 and WO 3 coatings for energy efficient glazing

Autorzy: Işıl Top, Russell Binions, Christian Sol, Ioannis Papakonstantinou, Marcin Holdynski, Sofia Gaiaschi, Isaac Abrahams
Opublikowane w: Journal of Materials Chemistry C, Numer 6/46, 2018, Strona(/y) 12555-12565, ISSN 2050-7534
Wydawca: Royal Society of Chemistry
DOI: 10.1039/c8tc04543g

Fire Retardant Action of Layered Double Hydroxides and Zirconium Phosphate Nanocomposites Fillers in Polyisocyanurate Foams

Autorzy: Eleni Asimakopoulou, Jianping Zhang, Maurice Mckee, Kinga Wieczorek, Anna Krawczyk, Michele Andolfo, Marco Scatto, Michele Sisani, Maria Bastianini, Anastasios Karakassides, Pagona Papakonstantinou
Opublikowane w: Fire Technology, Numer 56/4, 2020, Strona(/y) 1755-1776, ISSN 0015-2684
Wydawca: Kluwer Academic Publishers
DOI: 10.1007/s10694-020-00953-7

Mitigation of hysteresis due to a pseudo-photochromic effect in thermochromic smart window coatings

Autorzy: Christian Sol, Johannes Schläfer, Ivan P. Parkin, Ioannis Papakonstantinou
Opublikowane w: Scientific Reports, Numer 8/1, 2018, ISSN 2045-2322
Wydawca: Nature Publishing Group
DOI: 10.1038/s41598-018-31519-x

Assessment of fire behaviour of polyisocyanurate (PIR) insulation foam enhanced with lamellar inorganic smart fillers

Autorzy: Eleni Asimakopoulou, Jianping Zhang, Maurice McKee, Kinga Wieczorek, Anna Krawczyk, Michele Andolfo, Marco Scatto, Michele Sisani, Maria Bastianini
Opublikowane w: Journal of Physics: Conference Series, Numer 1107, 2018, Strona(/y) 032004, ISSN 1742-6588
Wydawca: Institute of Physics
DOI: 10.1088/1742-6596/1107/3/032004

High-Performance Planar Thin Film Thermochromic Window via Dynamic Optical Impedance Matching

Autorzy: Christian Sol, Mark Portnoi, Tao Li, Kargal L. Gurunatha, Johannes Schläfer, Stefan Guldin, Ivan P. Parkin, Ioannis Papakonstantinou
Opublikowane w: ACS Applied Materials & Interfaces, Numer 12/7, 2020, Strona(/y) 8140-8145, ISSN 1944-8244
Wydawca: American Chemical Society
DOI: 10.1021/acsami.9b18920

Thermochromic VO 2 − SiO 2

Autorzy: Johannes Schläefer, Christian Sol, Tao Li, Delphine Malarde, Mark Portnoi, Thomas J. Macdonald, Sophia K. Laney, Michael J. Powell, Işıl Top, Ivan P. Parkin, Ioannis Papakonstantinou
Opublikowane w: Solar Energy Materials and Solar Cells, Numer 200, 2019, Strona(/y) 109944, ISSN 0927-0248
Wydawca: Elsevier BV
DOI: 10.1016/j.solmat.2019.109944

Investigation of synergistic effects of inorganic smart fillers and expanded graphite on the flame retardancy of polyisocyanu rate insulation foam

Autorzy: Eleni ASIMAKOPOU LOU, Jianping ZHANG, Maurice McKEE, Kinga WIECZOREK, Anna KRAWCZYK, Michele ANDOLFO, Marco SCATTO, Michele SISANI and Maria BASTIANINI
Opublikowane w: Saint- Petersburg Polytechnic University, Numer 9th International Seminar of Fire and Explosion Hazards, 2019, Strona(/y) 1000-1009
Wydawca: Saint- Petersburg Polytechnic University
DOI: 10.18720/spbpu/2/k19-40

Theoretical Study of Flexible Edge Seals for Vacuum Glazing

Autorzy: Farid Arya, Trevor Hyde
Opublikowane w: International Journal of Structural and Construction Engineering, Numer Vol:11, No:8, 2017, 2017
Wydawca: World Academy of Science, Engineering and Technology

The Effect of Glass Thickness on Stress in Vacuum Glazing

Autorzy: Farid Arya; Trevor Hyde; Andrea Trevisi; Paolo Basso; Danilo Bardaro
Opublikowane w: Engineering and Technology International Journal of Energy and Environmental Engineering, Numer Vol. 12, issue 9, 2018, Strona(/y) 685-689
Wydawca: Open Science

Evonik participates in EU-project

Autorzy: Seier, Holger
Opublikowane w: Evonik Today, Numer 5, 2016, Strona(/y) 1, ISSN 2570-3226
Wydawca: Evonik Industries
DOI: 10.5281/zenodo.4607830

Rezultaty

Publikacje

Udostępnij tę stronę

Pobierz