Skip to main content
Przejdź do strony domowej Komisji Europejskiej (odnośnik otworzy się w nowym oknie)
polski pl
CORDIS - Wyniki badań wspieranych przez UE
CORDIS
Zawartość zarchiwizowana w dniu 2022-11-21

An investigation of the possibilities for the simultaneous treatment of wastes from iron- and steel-making rich in Zn and Pb, and from spent hydrochloric pickling baths - Phase II

Cel

Optimization of a process for the treatment of blast furnace sludges with a view to their recycling for the agglomeration of iron ores, which will be economically acceptable and which will avoid the dumping of the Zn/Pb wastes.
In general terms, the treatment process appears to be simple and flexible. It involves only conventional equipment. The capital charges appear to be acceptable, even in the case of small-capacity plants. Under the present economic conditions in Belgium the recycling process does not, however, appear to be competitive when compared with controlled dumping (costs varying from single to double).
Until now, zinc- and lead-bearing wastes resulting from the removal of dust from gases from blast furnaces and steelworks have been eliminated by dumping. Even if it is a question for some of a long term view, the shortage of sites, the deterrent effect of the cost, and growing ecological constraints are arguments in favour of the development of treatment processes and recycling. The treatment line advocated by CRM/CEBEDEAU makes use of hydrometallurgy in an acidic environment.

The first characteristic of the process is the utilization, as a leaching reagent, of another waste produced in integrated iron and steel manufacture, namely, liquor from spent hydrochloric pickling baths, The second characteristic is to carry out a more selective solubilization of Zn/Pb/alkali compounds (but also Ca and Mg) in an acidic environment, with the exclusion of iron oxides, by creating, on the contrary, favourable conditions in this solubilization environment for the precipitation of iron in spent pickling bath liquor (in the form of goethite) and, as a consequence, the enrichment of iron in the waste, for recycling for the agglomeration of iron ore.

There are two successive phases of laboratory work.

Phase I
Verification of the basic reactions in batch reactors with the objectives of confirming the feasibility of the initially proposed flow-sheet, of defining the main operating conditions, and of establishing the order of magnitude of the yields from the various reactions.

Presentation of preliminary economic data.

Phase II
Optimization of the reactions and the physico-chemical unit operations, selection of a final flow-sheet, and the construction of a small continuous treatment plant.

The establishment of a more accurate economic appraisal.

Dziedzina nauki (EuroSciVoc)

Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: Europejski Słownik Naukowy.

Projekt nie został jeszcze sklasyfikowany według klasyfikacji EuroSciVoc.
Wskaż dziedziny nauki, które twoim zdaniem są najbardziej istotne z punktu widzenia tego projektu i pomóż nam usprawnić naszą usługę klasyfikacji.

Aby użyć tej funkcji, musisz się zalogować lub zarejestrować

Program(-y)

Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.

Temat(-y)

Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.

Zaproszenie do składania wniosków

Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.

Brak dostępnych danych

System finansowania

Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.

Brak dostępnych danych

Koordynator

Centre de Recherches Metallurgiques
Wkład UE
Brak danych
Adres
11 rue Ernest Solvay
4000 Liege
Belgia

Zobacz na mapie

Koszt całkowity

Ogół kosztów poniesionych przez organizację w związku z uczestnictwem w projekcie. Obejmuje koszty bezpośrednie i pośrednie. Kwota stanowi część całkowitego budżetu projektu.

Brak danych
Moja broszura 0 0