Reliable Aircraft electrical Insulation System sElection

Informacje na temat projektu

RAISE

Identyfikator umowy o grant: 785513

DOI 10.3030/785513

Projekt został zamknięty

Data podpisania przez KE 7 Lutego 2018

Data rozpoczęcia 1 Marca 2018

Data zakończenia 31 Grudnia 2020

Finansowanie w ramach

• SOCIETAL CHALLENGES - Smart, Green And Integrated Transport

Koszt całkowity € 396 401,25

Wkład UE € 396 401,25

Koordynowany przez

UNIVERSITA DEGLI STUDI DI MODENA E REGGIO EMILIA
Italy

Rezultaty

Open Research Data Pilot (1)

Data Management Plan

This document describes the data management life cycle for the data to be collected, processed and/or generated by the project. The DMP will be updated over the course of the project whenever significant changes arise.

Documents, reports (3)

Report of PD and breakdown behaviour of components exposed to high voltage gradients including verification methods; including results of WP2

A report of the activity will be delivered. The report will focus on the impact of increasing slew rates on the partial discharge and breakdown behaviour of typical components used in the aerospace environment (including the impact of varying pressure, humidity and temperature). The document will define the list of materials subjected to investigation. This will include materials already adopted in aerospace applications and materials, not already certified, but that are likely to be used. The document will derive guidelines to (a) prevent PD inception when the aircraft is cruising at high altitudes and (b) to understand the voltage to apply during quality tests carried out on complete stators at the ground level. Then, it will identify tests/methods for the verification and qualification of new insulation systems.

Plan for Communication, Dissemination and Exploitation of project results

This document will contain the plan of communication activities, a plan for dissemination of project results and a plan for exploitation of project results and handling of IP rights linked to project outputs

Report on Communication, Dissemination and Exploitation actions

This document will report on the actual activities for dissemination of project results and a plan for exploitation of project results and handling of IP rights linked to project outputs

Publikacje

Peer reviewed articles (3)

Partial Discharges in Electrical Machines for the More Electrical Aircraft. Part III: Preventing Partial Discharges

Autorzy: Luca Lusuardi; Alberto Rumi; Andrea Cavallini; Davide Barater; Stefano Nuzzo; Marco Pastura
Opublikowane w: IEEE access, Numer 9, 2021, Strona(/y) 30113 - 30123, ISSN 2169-3536
Wydawca: Institute of Electrical and Electronics Engineers Inc.
DOI: 10.1109/ACCESS.2021.3058090

Partial Discharge Phenomena in Electrical Machines for the More Electrical Aircraft. Part II: Impact of Reduced Pressures and Wide Bandgap Devices

Autorzy: Luca Lusuardi, Alberto Rumi, Andrea Cavallini, Davide Barater, Stefano Nuzzo
Opublikowane w: IEEE Access, Numer 9, 2021, Strona(/y) 27485-27495, ISSN 2169-3536
Wydawca: Institute of Electrical and Electronics Engineers Inc.
DOI: 10.1109/ACCESS.2021.3058089

Partial Discharges in Electrical Machines for the More Electric Aircraft—Part I: A Comprehensive Modeling Tool for the Characterization of Electric Drives Based on Fast Switching Semiconductors

Autorzy: Marco Pastura, Stefano Nuzzo, Fabio Immovilli, Andrea Toscani, Alberto Rumi, Andrea Cavallini, Giovanni Franceschini, Davide Barater
Opublikowane w: IEEE Access, Numer 9, 2021, Strona(/y) 27109-27121, ISSN 2169-3536
Wydawca: Institute of Electrical and Electronics Engineers Inc.
DOI: 10.1109/ACCESS.2021.3058083

Conference proceedings (6)

Dv/Dt Filtering Techniques for Electric Drives: Review and Challenges

Autorzy: M. Pastura, S. Nuzzo, M. Kohler, D. Barater,
Opublikowane w: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society, 2019, Strona(/y) pp. 7088-7093, ISBN 978-1-7281-4878-6
Wydawca: IEEE
DOI: 10.1109/iecon.2019.8926663

Sensitivity Analysis on the Voltage Distribution within Windings of Electrical Machines fed by Wide Band Gap Converters

Autorzy: Marco Pastura, Stefano Nuzzo, Giovanni Franceschini, Giacomo Sala, Davide Barater
Opublikowane w: 2020 International Conference on Electrical Machines (ICEM), 2020, Strona(/y) 1594-1600, ISBN 978-1-7281-9945-0
Wydawca: IEEE
DOI: 10.1109/ICEM49940.2020.9270958

Assessment Techniques to Ensure Reliable Electrical Insulation for More Electric Transportation

Autorzy: L. Lusuardi, A. Rumi and A. Cavallini
Opublikowane w: 45th Annual Conference of the IEEE Industrial Electronics Society (IECON 2019), Lisbon, Portugal, 14-17 Oct. 2019, 2019, Strona(/y) 7083-7087, ISBN 978-1-7281-4878-6
Wydawca: IEEE
DOI: 10.1109/iecon.2019.8927253

Aircraft Insulation Design for the More Electrical Aircraft: Challenges and Solutions

Autorzy: RUMI; Cavallini
Opublikowane w: 2020 International Symposium on Electrical Insulating Materials (ISEIM), Numer 1, 2020, Strona(/y) pp. 120-123, ISBN 978-4-88686-418-5
Wydawca: IEEE
DOI: 10.3030/785513

Assessing the severity of partial discharges in aerospace applications

Autorzy: Luca Lusuardi, Alberto Rumi, Gabriele Neretti, Paolo Seri, Andrea Cavallini
Opublikowane w: 2019 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), 2019, Strona(/y) 267-270, ISBN 978-1-7281-3121-4
Wydawca: IEEE
DOI: 10.1109/ceidp47102.2019.9009970

The Impact of Impregnating Resins in Ensuring the Reliability of Inverter-Fed Machines

Autorzy: Rumi; Cavallini; Jacopo
Opublikowane w: 2020 International Symposium on Electrical Insulating Materials (ISEIM), Numer 1, 2020, Strona(/y) pp. 253-256, ISBN 978-4-88686-418-5
Wydawca: IEEE