SnapToPowerQuality: Protect Production Facilities from Power Quality Failures using Low-cost Clamp-on Measurements from the Outside of Existing Multiconductor Cables

Informacje na temat projektu

SnapToPowerQuality

Identyfikator umowy o grant: 958600

DOI

10.3030/958600

Projekt został zamknięty

Data podpisania przez KE 31 Lipca 2020

Data rozpoczęcia 1 Sierpnia 2020

Data zakończenia 31 Lipca 2022

Finansowanie w ramach

Horizon 2020 Framework Programme

Koszt całkowity

€ 2 239 943,75

Wkład UE

€ 1 708 193,75

1 708 193,75

531 750,00

Koordynowany przez

TECHNISCHE UNIVERSITEIT EINDHOVEN
Netherlands

Periodic Reporting for period 2 - SnapToPowerQuality (SnapToPowerQuality: Protect Production Facilities from Power Quality Failures using Low-cost Clamp-on Measurements from the Outside of Existing Multiconductor Cables)

Okres sprawozdawczy: 2021-08-01 do 2022-07-31

With the introduction of more green energy and more electronic products power quality is a growing concern for production companies.
Poor power quality is a major problem for production companies. Power quality issues leads to nonscheduled shutdowns of production lines and early wear out of expensive equipment.
The objective of the project is to create an affordable and automatic surveillance of the power quality making it possible for the companies to take adequate precautions.

The first host for pilot 1 has been identified. Vola in Horsens Denmark has been chosen as they are experiencing problems with their power quality.

A lot of work has gone into examining and determining where to place dataloggers to ensure maximum coverage. Remoni hardware has been installed and data collection has begun.

Pilot 1 is well ahead of plan, which gives the project the opportunity to collect a lot of background data which can support the development activities in the project.

Pilot site 1 installation

Periodic Reporting for period 2 - SnapToPowerQuality (SnapToPowerQuality: Protect Production Facilities from Power Quality Failures using Low-cost Clamp-on Measurements from the Outside of Existing Multiconductor Cables)

Pobierz Pobierz zawartość strony