Cel The project is about the installation in a heating zone of a slab reheating furnace with four burners with flame length modulation.These burners ensure a very homogenious heating of a slab thus reducing the average heating temperature.There results energy savings and major improvements of the quality, productivity and also reduction polluant emissions of nitrogene and sulfuric oxydes.The differents stages are :Phase 1 - pre-studies of the size and the fitting of the burners Phase 2 - pre-studies of the instrumentation to be installedPhase 3 - burners constructionPhase 4 - mounting of burners, piping, utilitiesPhase 5 - mounting of control and monitoring system for each air entryThe burners to be installed are of concentric distribution airs and fuel type, allowing impulsion modulation and rate distribution. This operation results in energy consumption reduction of the reheating furnace for four reasons :- reduction of the 20 deg. C overheating of the medium short slabs i. e. annual saving of 283 tep- reduction of the 10 deg. C overheating of the long and short slabs i. e. annual saving of 283 tep- decrease of the air excess with 170 tep/yr of energy saving- increase of the furnace heating yield with 227 tep/yr of energy saving.So a total energy saving of : 963 tep/yr. Program(-y) ENG-ENDEMO C - Programme (EEC) of demonstration projects and industrial pilot projects (EEC) in the energy field, 1985-1989 Temat(-y) 3.4 - INDUSTRY Zaproszenie do składania wniosków Data not available System finansowania DEM - Demonstration contracts Koordynator SOLLAC FOS (JEAN-CLAUDE MULLER) Wkład UE Brak danych Adres FR - 13776 FOS SUR MER CEDEX Francja Zobacz na mapie Koszt całkowity Brak danych
