Cel
In the ATOL project an international consortium will evaluate the production worthiness of the Atomic Layer Chemical Vapour Deposition (ALCVD) tool for barrier and Cu seed multilayer metal applications in CMOS013 manufacturing. The consortium will establish a list of specifications against which the performance of the tool will be compared to. Initially the components of the system-the TiN and Cu process modules- will be tested with regard to the uniformity and reproducibility of the thin film properties. In the second phase of the evaluation the performance of the whole system will be measured including throughput and Cost of Ownership (CoO).
Objectives:
The project will critically support the commercialisation of the Atomic Layer Chemical Vapour Deposition (ALCVD) tool of ASM microchemistry for barrier and Cu seed applications in the CMOS013 production. It will enable the tool manufacturer to enter the advanced metallisation tool market with a breakthrough system. This will be achieved by giving an international consortium the opportunity to test the tool at the assessment centre. The semiconductor chip manufacturers, taking part in this project, represent a wide range of products consisting of microprocessors and memory chips for personal computers, chips for telecommunications, for consumer electronics etc. Therefore, the tool will be exposed to demands from different product sectors. It also gives European chip manufacturers the possibility to take part in the assessment of a state-of-the-art technique, which will give them a competitive advantage in determining their metallisation strategy in time for the CMOS013 node.
Work description:
The project will be carried out in three different work packages with each package lasting 6 months. In work package 1 the tool assessment will be prepared. This includes establishing the specification targets by the consortium, against which the tool will be compared, the configuration of the tool at the vendors site, shipment, installation and basic qualification at the site of the assessment centre. In work package 2 the components of the tool, i.e. the process modules will be evaluated in terms of their production worthiness. The performance of the barrier module will be constrated to the specifications established in work package 1 by the consortium. Processes of Record (POR), which are proven to be materials compatible with a CMOS flow, will be installed on the process modules. The testing, which will mainly be done on blanket wafers, will evaluate the uniformity and reproducibility of the deposition of ALCVD TiN and Cu by measuring different thin film properties over a number of wafers. In work package 3 a unified approach to the assessment of the tool is taken. In this part the focus is on the optimisation of the throughput. An analysis of the throughput will reveal the bottlenecks and their impact on the throughput will be reduced. Among other parameters the throughput will eventually be fed into a Cost of Ownership (CoO) calculation of the ALCVD metallisation tool. It will provide the basis for a comparison between ALCVD and ionised-PVD. The latter is currently the industries standard. Furthermore, the performance of the ALCVD films will be evaluated on topography wafers. Meander/fork structures with critical dimensions of the CMOS013 node will serve as a test vehicle to determine the number of electrically active defects due to ALCVD TiN and Cu. The results will be contrasted to results obtained from ionised-PVD metallisation.
Milestones:
The assessment programme will yield a list of specifications the ALCVD tool has to achieve to demonstrate the reproduction worthiness for the CMOS013 device generation. The performance of the barrier and Cu seed modules will be contrasted to the specifications on the uniformity and repeatability of thin film properties and defect generation. The throughput of the system will be optimised in the course of the programme, which will result in Cost of Ownership evaluation of the ALCVD tool.
Dziedzina nauki (EuroSciVoc)
Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: Europejski Słownik Naukowy.
Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: Europejski Słownik Naukowy.
- inżynieria i technologia inżynieria elektryczna, inżynieria elektroniczna, inżynieria informatyczna inżynieria elektroniczna sprzęt komputerowy procesor komputerowy
- inżynieria i technologia inżynieria elektryczna, inżynieria elektroniczna, inżynieria informatyczna inżynieria elektroniczna czujniki czujniki optyczne
- nauki przyrodnicze nauki chemiczne chemia nieorganiczna metale nieszlachetne
- inżynieria i technologia inżynieria materiałowa powłoki
- inżynieria i technologia inżynieria elektryczna, inżynieria elektroniczna, inżynieria informatyczna inżynieria informacyjna telekomunikacja
Aby użyć tej funkcji, musisz się zalogować lub zarejestrować
Słowa kluczowe
Słowa kluczowe dotyczące projektu wybrane przez koordynatora projektu. Nie należy mylić ich z pojęciami z taksonomii EuroSciVoc dotyczącymi dziedzin nauki.
Słowa kluczowe dotyczące projektu wybrane przez koordynatora projektu. Nie należy mylić ich z pojęciami z taksonomii EuroSciVoc dotyczącymi dziedzin nauki.
Program(-y)
Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.
Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.
Temat(-y)
Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.
Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.
Zaproszenie do składania wniosków
Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.
Brak dostępnych danych
Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.
System finansowania
Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.
Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.
Koordynator
3001 LEUVEN
Belgia
Ogół kosztów poniesionych przez organizację w związku z uczestnictwem w projekcie. Obejmuje koszty bezpośrednie i pośrednie. Kwota stanowi część całkowitego budżetu projektu.