Skip to main content
Przejdź do strony domowej Komisji Europejskiej (odnośnik otworzy się w nowym oknie)
polski pl
CORDIS - Wyniki badań wspieranych przez UE
CORDIS
Zawartość zarchiwizowana w dniu 2022-12-27

PILOT IMPLEMENTATION OF A FIBRE OPTICS METHANE DETECTION SYSTEM FOR OFFSHORE PLATFORMS

Cel

The aim of the project is to demonstrate by a field trial that a new gas detection technology which has been developed within the promoter's laboratories achieves better performance levels than the ones presently attainable. The gas detection system, composed of a central instrument installed in a control room and a series (3 in this demo) of detection cells had to be operated on an Agip platform in the Adriatic sea. This was considered essential since the final goal of this work is the commercial exploitation of this technology. Possible customers consider a field test as essential. This project was crucial to convince the potential future manufacturer to invest in this young technology. The preliminary work necessary to perform the installation on a working platform also had the goal of producing engineering documentation to be used in the industrial exploitation.L%
The main results are :
- the positive assessment of the suitability of this technology for the offshore gas detection task
- the availability of an engineered pre-commercial prototype
- information necessary for setting up a commercial version.
The project was carried out by Tecsa in association with VUMAN Ltd. (venture company of the Manchester University) and by the engineering firm Snamprogetti Ltd (Basingstoke, UK). The national Italian oil company Agip SpA cooperated as an associate partner.
Gas detection technology was traditionally based on catalytic type detectors which proved to be inadequate for the safe operation of offshore rigs and only recently a few new developments have resulted in commercial systems characterised by a suitable performance (open path and point detectors based on IR absorption).
The technology at the base of the project comes from merging the experimental experience and the specific background that Vuman and Tecsa have as a result of former developments in this area.
The first phase of the project included the preparation of the executive design of the prototype to be demonstrated and the planning of the test installation. The issues related to installation engineering, compliance with offshore safety codes etc. were taken care of by Snamprogetti Ltd. Phase two was devoted to construction of the instrument (Vuman for the laser, optical and detection parts and Tecsa for electronics, field cells structures and software). In phase three the system was installed on one Agip platform close to Ravenna (I) and its performance was monitored for seven months. Phase four was devoted to the evaluation of system performance, to reporting and to information dissemination activities.

Dziedzina nauki (EuroSciVoc)

Klasyfikacja projektów w serwisie CORDIS opiera się na wielojęzycznej taksonomii EuroSciVoc, obejmującej wszystkie dziedziny nauki, w oparciu o półautomatyczny proces bazujący na technikach przetwarzania języka naturalnego. Więcej informacji: Europejski Słownik Naukowy.

Projekt nie został jeszcze sklasyfikowany według klasyfikacji EuroSciVoc.
Wskaż dziedziny nauki, które twoim zdaniem są najbardziej istotne z punktu widzenia tego projektu i pomóż nam usprawnić naszą usługę klasyfikacji.

Aby użyć tej funkcji, musisz się zalogować lub zarejestrować

Program(-y)

Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.

Temat(-y)

Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.

Zaproszenie do składania wniosków

Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.

Brak dostępnych danych

System finansowania

Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.

DEM - Demonstration contracts

Koordynator

Tecsa Ricerca e Innovazione Srl
Wkład UE
Brak danych
Adres
Via Caravaggi 9
24040 Levate Bergamo
Włochy

Zobacz na mapie

Koszt całkowity

Ogół kosztów poniesionych przez organizację w związku z uczestnictwem w projekcie. Obejmuje koszty bezpośrednie i pośrednie. Kwota stanowi część całkowitego budżetu projektu.

Brak danych