Skip to main content
European Commission logo
polski polski
CORDIS - Wyniki badań wspieranych przez UE
CORDIS

Integrated TRM System for the Seismic Strengthening of Masonry Heritage

Opis projektu

Technologia zapraw wzmacnianych włóknami zwiększy wytrzymałość budynków murowanych

Większość budynków w Europie, w szczególności obiektów o znaczącej wartości architektonicznej lub historycznej, to tradycyjne konstrukcje murowane, które wymagają regularnych interwencji mających na celu wzmocnienie ich konstrukcji, by lepiej radziły sobie ze wstrząsami sejsmicznymi. Najnowsza innowacyjna technika zapraw wzmacnianych włóknami jest bardzo obiecująca, jednak jej skuteczność zależy od łączników stosowanych do mocowania warstw zbrojących do podłoża. Stosowane łączniki różnią się w zależności od parametrów – nie istnieją bowiem ogólnie uznane wytyczne dotyczące projektowania, praktycznej instalacji i osiągów mechanicznych zintegrowanego systemu wzmacniającego obejmującego nowe zaprawy i łączniki. Badacze skupieni wokół finansowanego ze środków Unii Europejskiej projektu CONNECT wykorzystają podejście doświadczalno-obliczeniowe w celu opracowania zaleceń dotyczących prawidłowego planowania interwencji z wykorzystaniem nowych zapraw dzięki racjonalnemu zastosowaniu łączników w zagrożonych budynkach murowanych.

Cel

Traditional masonry buildings constitutes the greatest part of the building stock in Europe, involving constructions with high historical, architectural and cultural value. These buildings are particularly susceptible to horizontal actions, as demonstrated during past many seismic events, thus requiring rehabilitation and strengthening actions in order to improve their structural behaviour. Within this scope, innovative strengthening techniques, such as Textile Reinforced Mortar (TRM) composite materials, have been adopted during the last years. TRMs have shown to be quite effective for retrofitting of masonry, but the effectiveness of this technique depends on several parameters. In particular, a key point to the success of the strengthening is the use of connectors to fix the reinforcing layer and prevent it from debonding or delamination, which would turn the strengthening measure useless.
Currently, connectors are used in TRM applications in an empirical way and no commonly accepted guidelines are available regarding the design, practical installation and mechanical performance of the integrated TRM/connector strengthening system. Thus, the role of mechanical anchors in the performance of the TRM system needs to be characterized and to be taken into account for a rational and efficient design of TRM systems, allowing to reduce the uncertainty of its mechanical behaviour and increasing the confidence in the technique.
The aim of the project is the development of recommendations to properly design TRM-strengthened interventions by the rational application of connectors for the retrofitting of masonry buildings exposed to seismic actions. This will be achieved by the integration of robust experimental results and advanced numerical modelling of the TRM/connector system, supported
on an initial state of the review. The combined experimental-numerical approach is the core of the project, which will be complemented by management and dissemination tasks.

Zaproszenie do składania wniosków

H2020-WF-2018-2020

Zobacz inne projekty w ramach tego zaproszenia

Szczegółowe działanie

H2020-WF-03-2020

Koordynator

UNIVERSIDADE DO MINHO
Wkład UE netto
€ 147 815,04
Adres
LARGO DO PACO
4704 553 Braga
Portugalia

Zobacz na mapie

Region
Continente Norte Cávado
Rodzaj działalności
Higher or Secondary Education Establishments
Linki
Koszt całkowity
€ 147 815,04