Cel
BioMOre describes a “New Mining Concept for Extracting Metals from Deep Ore Deposits using Biotechnology”. The concept is to use hydrofracturing for stimulation and bioleaching for winning of ores. The final process will consist of a so-called doublet, which is two deviated and parallel wells.
In order to avoid high costs for drilling from the surface, the BioMOre approach is divided into two phases. Phase 1 will be research on the intended bioleaching process whereas phase 2 will aim at a pilot installation to demonstrate the applicability of the process in large scale including hydro-fracturing and access of the deposit from surface.
The first phase should cover the intended work of the current BioMOre approach without drilling from surface.
The BioMOre project aims at extracting metals from deep mineralized zones in Europe (Poland-Germany, Kupferschiefer deposit as a test case) by coupling solution mining and bioleaching. Selected sustainability indicators based on regulatory requirements of the European Commission will be applied for feasibility considerations.
The main objective of the BioMOre first phase is to design and build an underground test facility for testing the concept of combined hydro-fracturing and bioleaching. The test facility will comprise a 100 m² ore block, where boreholes will be drilled horizontally using standard equipment. All necessary equipment for testing different parameters of the intended bioleaching process will be established underground.
The intention is to test the bioleaching process in high detail in an in-situ environment at the same time avoiding time consuming and risky permission procedures. On the other hand, the application for the permission of underground test operation must contain detailed information about monitoring of tests and all material controls. No harmful substances will remain in the mine after the tests are completed. Further to that, predictive numerical modelling of a pilot installation should be done.
Dziedzina nauki
Program(-y)
Zaproszenie do składania wniosków
Zobacz inne projekty w ramach tego zaproszeniaSzczegółowe działanie
H2020-SC5-2014-one-stage
System finansowania
RIA - Research and Innovation actionKoordynator
59301 Lubin
Polska
Zobacz na mapie
Uczestnicy (24)
Zakończenie uczestnictwa
B93 9PB Solihull
Zobacz na mapie
Organizacja określiła się jako MŚP (firma z sektora małych i średnich przedsiębiorstw) w czasie podpisania umowy o grant.
30-059 Krakow
Zobacz na mapie
LL57 2DG Bangor
Zobacz na mapie
30655 Hannover
Zobacz na mapie
45060 Orleans
Zobacz na mapie
41860 GERENA SEVILLA
Zobacz na mapie
75794 Paris
Zobacz na mapie
Podmiot prawny inny niż podwykonawca, stowarzyszony lub mający inne powiązania prawne z uczestnikiem. Podmiot realizuje prace na podstawie warunków umowy o grant, dostarcza towary lub świadczy usługi związane z działaniem, jednak nie podpisuje umowy o grant. Podmiot zewnętrzny przestrzega zasad i wymogów dotyczących danego uczestnika wynikających z umowy o grant, dotyczących kwalifikowalności kosztów oraz kontroli wydatków.
54052 Nancy Cedex
Zobacz na mapie
45307 Essen
Zobacz na mapie
09633 Halsbrucke
Zobacz na mapie
Organizacja określiła się jako MŚP (firma z sektora małych i średnich przedsiębiorstw) w czasie podpisania umowy o grant.
02151 Espoo
Zobacz na mapie
SW1E 5BH LONDON
Zobacz na mapie
01328 Dresden
Zobacz na mapie
44 100 Gliwice
Zobacz na mapie
112 51 STOCKHOLM
Zobacz na mapie
Organizacja określiła się jako MŚP (firma z sektora małych i średnich przedsiębiorstw) w czasie podpisania umowy o grant.
53-659 Wrocław
Zobacz na mapie
02943 WEISSWASSER
Zobacz na mapie
2125 Randburg
Zobacz na mapie
09599 Freiberg
Zobacz na mapie
33100 Tampere
Zobacz na mapie
01109 Dresden
Zobacz na mapie
02150 Espoo
Zobacz na mapie
08056 ZWICKAU
Zobacz na mapie
Organizacja określiła się jako MŚP (firma z sektora małych i średnich przedsiębiorstw) w czasie podpisania umowy o grant.
2721 Bad Fischau-Brunn
Zobacz na mapie
Organizacja określiła się jako MŚP (firma z sektora małych i średnich przedsiębiorstw) w czasie podpisania umowy o grant.