Cel
In iPIM a developed prototype of sophisticated non-destructive technique (NDT) for structural health monitoring system (SHM) of oil and gas (O&G) pipelines will be further modified so that the system can be made available for commercialization. iPIM will continuously monitor the pipeline for cracks, corrosion and other faults and send the information over a wireless communication system to the network monitoring centre where the fault will be displayed over a 3D map of the pipeline. This will help the pipeline operators to take preventive and corrective measures before any accident stemmed from pipeline failure occurs. A low profile wireless Acoustic Emission (AE) and Long Range Ultrasonic (LRU) dual mode sensors will be permanently attached on the pipeline with a collar installed 100m apart from each other that can monitor 50m of pipeline in either side. The sensors will act in passive AE mode in normal operation and on detection of an anomaly will switch to LRU mode to locate and determine the characteristics of the anomaly. An artificial neural network (ANN) and data fusion system will intelligently manage data acquisition and analysis functions based on data received from the installed sensor nodes. An energy harvesting system will be developed to power the onsite electronics. A new software will be developed that will enable advanced signal processing with improved signal/noise separation in handling sensor data, thus supporting more sensitive measurement and more effective analysis.
iPIM will ensure onshore pipeline safety and reduce cost due to pipeline failure in the Europe. The expected profit to the SMEs generated through the exploitation of the iPIM system is in the order of €56 Million, representing a return on investment (RoI) of 612%. With revenue per capita in the sector of €100,000 per employee, the creation of some 600 new, high-skilled, high-technology jobs in Europe has been anticipated.
Dziedzina nauki
- engineering and technologycivil engineeringstructural engineeringstructural health monitoring
- engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsignal processing
- engineering and technologyenvironmental engineeringenergy and fuelsfossil energynatural gas
- engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringsensors
- natural sciencescomputer and information sciencesartificial intelligencemachine learning
Program(-y)
Zaproszenie do składania wniosków
Zobacz inne projekty w ramach tego zaproszeniaSzczegółowe działanie
H2020-SMEINST-2-2014
System finansowania
SME-2 - SME instrument phase 2Koordynator
54655 Thessaloniki
Grecja
Organizacja określiła się jako MŚP (firma z sektora małych i średnich przedsiębiorstw) w czasie podpisania umowy o grant.