Opis projektu
Przekształcanie odpadów rozbiórkowych w nowe rozwiązania
Odpady budowlane i rozbiórkowe są pozostałością po budowach, remontach oraz rozbiórkach zarówno domów, jak i elementów infrastruktury. Ze względu na to, że beton jest najczęściej stosowanym materiałem w sektorze budowlanym, powstały innowacyjne technologie wytwarzania wysokiej jakości kruszyw betonowych z recyklingu do wykorzystania w nowym betonie. Wciąż jednak nie udało się usunąć wszystkich przeszkód stojących na drodze do rozwoju i popularyzacji tego rozwiązania. Ponadto istnieją mniej popularne i nowe odpady rozbiórkowe, w przypadku których stosowne rozwiązania technologiczne i biznesowe nie zostały jeszcze opracowane. Zespół finansowanego ze środków Unii Europejskiej projektu VEEP opracuje i zaprezentuje nowe i korzystne rozwiązania technologiczne, które pozwolą na stworzenie innowacyjnego podejścia do recyklingu odpadów rozbiórkowych w obiegu zamkniętym i produkcji wielowarstwowych prefabrykowanych elementów betonowych. Rozwiązania obejmą nowe rodzaje betonu oraz materiały izolacyjne wytwarzane w co najmniej 75 % z odpadów rozbiórkowych pochodzących z recyklingu.
Cel
Around 461 million ton/year of C&DW are generated in EU28. Recent studies on the characterization of C&DW samples at European level revealed a predominant fraction of concrete (52% average). Over the last years, novel technology has been developed aiming to guarantee high quality recycled concrete aggregates for use in new concrete, thereby closing the concrete loop. The most advanced concrete recycling technologies currently produce coarse (>4mm) recycled concrete aggregates by removing cement paste from the surface of the aggregates. However, the fine (0-4 mm) fraction, ca. 40% of the concrete waste, still faces technical barriers to be incorporated into new concrete and consequently, is often down-cycled. At the other extreme, there are minor (e.g. glass) and emerging (e.g. mineral wool) C&DW materials, currently accounting for 0.7% of the total, but revealing growing rates as consequence of European regulations. Those emerging C&DW streams have not yet found technological and business solutions, being mostly landfilled. On the other hand, concrete is the most widely used material in building, with a growing trend towards prefabrication. The European precast concrete sector faces diverse needs for resource efficiency improvement (reduction in natural resource consumption and metabolization of waste materials, reduction in carbon footprint and embodied energy, design for reuse, increase in process efficiency and waste minimization, lighter solutions, enhanced thermal performance through novel cost-effective insulating materials). Aiming at facing these challenges, VEEP main objective is to eco-design, develop and demonstrate new cost-effective technological solutions that will lead to novel closed-loop circular approaches for C&DW recycling into novel multilayer precast concrete elements (for both new buildings and refurbishment) incorporating new concretes as well as superinsulation material produced by using at least 75% (by weight) of C&DW recycled materials.
Dziedzina nauki
Program(-y)
Zaproszenie do składania wniosków
Zobacz inne projekty w ramach tego zaproszeniaSzczegółowe działanie
H2020-EEB-2016
System finansowania
RIA - Research and Innovation actionKoordynator
16129 Genova
Włochy