Opis projektu
Innowacyjne oczyszczanie odpadów w formie MDF
Cele w zakresie energii odnawialnej oraz bioprodukty przyczyniły się do wzrostu zapotrzebowania na drewno i produkty na bazie drewna. Wiele z nich stało się towarami o „krótkim” cyklu eksploatacji. Jednakże brak odpowiednich rozwiązań techniczno-ekonomicznych uniemożliwia ich ponowne wykorzystanie bądź recykling. Jeden z takich towarów, zalegający w dużych ilościach na wysypiskach śmieci, to płyta pilśniowa o średniej gęstości (ang. medium-density fibreboard, MDF). W związku z tym zespół finansowanego ze środków UE projektu FibreCarb przedstawia innowacyjny proces uzdatniania odpadów z MDF skierowany przede wszystkim do rynku aktywowanego węgla opartego na drewnie, który to sektor cechuje się wysoką wartością. Ta samowystarczalna technologia polega na „upcyklingu” odpadów z MDF i przekształceniu ich w wysokiej jakości aktywowany węgiel oraz drugorzędowe źródło energii odnawialnej.
Cel
Mankind uses wood as a raw material since the stone age. It has been perceived to be an abundantly available even renewable resource, it literally grows everywhere and people have a natural tendency to apply wood for their everyday use in many ways Nevertheless, Recently, demand for wood and wood-based products are significant increasing, not only for reaching the renewable energy target but also for bio-products for biorefineries. Unfortunately, many of these products have become nowadays commodity products with “short” lifespans. They still have not found their way to be fully reused or recycled, lacking appropriate techno–economic solutions. One of these commodity products - being produced at 11.000.000 ton/year and resulting in 10.000.000 m³ of landfilled material – is fibreboard (MDF board), one of the wood-board types used in many cheaper type of furniture. Act&Sorb developed a technology that addresses the societal challenge by having identified a high value large market– the wood based activated carbon market – currently using also fresh wood! Act&Sorb has been able – aligned with its overall vision and strategy – to design the MDF waste treatment process in such a way that the component within the MDF waste causing it to be difficult to be recycled – the glue – is turned into a valued resource – enabling the production of nitrogen incorporated wood-board waste activated carbon, a specialty product with high market value. The concept has the potential to treat the full amount of fiberboard waste while eliminating the need for fresh wood for the production of wood based activated carbon.
Dziedzina nauki
- engineering and technologyenvironmental engineeringwaste managementwaste treatment processesrecycling
- engineering and technologyenvironmental engineeringenergy and fuelsrenewable energy
- engineering and technologychemical engineeringseparation technologiesdesalinationreverse osmosis
- engineering and technologyindustrial biotechnologybiomaterials
- agricultural sciencesagriculture, forestry, and fisheriesforestry
Program(-y)
Zaproszenie do składania wniosków
Zobacz inne projekty w ramach tego zaproszeniaSzczegółowe działanie
H2020-SMEINST-1-2016-2017
System finansowania
SME-1 - SME instrument phase 1Koordynator
3530 HOUTHALEN-HELCHTEREN
Belgia
Organizacja określiła się jako MŚP (firma z sektora małych i średnich przedsiębiorstw) w czasie podpisania umowy o grant.