Opis projektu
Innowacyjny aktywny cewnik na potrzeby zabiegów wewnątrznaczyniowych
Zabiegi wewnątrznaczyniowe polegają na wprowadzeniu do tętnicy w ramieniu lub nodze pacjenta oraz przeprowadzeniu przez układ krwionośny cewnika, który należy doprowadzić do miejsca zabiegu. Obecnie lekarze wykorzystują pasywne cewniki sterowane przy pomocy elastycznych prowadnic, co utrudnia prowadzenie zabiegów w wypadku złożonej anatomii naczyń. Francuska firma Basecamp Vascular opracowuje innowacyjny wyrób medyczny w postaci aktywnej i regulowanej prowadnicy cewnika, która umożliwia dostosowanie procesu do indywidualnych różnic anatomicznych między pacjentami. Pierwsza wersja tego urządzenia została opracowana z myślą o dopuszczeniu przez organy regulacyjne oraz badaniach klinicznych, a także o późniejszej komercjalizacji. Finansowany ze środków Unii Europejskiej projekt MULTICURVE ma na celu wspieranie optymalizacji strategii biznesowej w zakresie dostępu do rynków docelowych.
Cel
While endovascular procedures have grown very quickly in the past years, notably for the treatment of neurovascular pathologies, they may be impossible to implement when navigation is complicated by high vessels tortuosities or bifurcations angulations. In such cases, medical practitioners have no choice but to use alternative techniques, often complex and costly.
Basecamp Vascular (BCV), a French SME created in 2016, is focused on the development and commercialisation of a breakthrough medical device: the first ever mechatronic active catheter dedicated to endovascular navigation in any anatomy, even complex, for neurovascular pathologies. BCV aims at providing the world market of endovascular procedures, specifically the “endovascular access” segment (+/- 8 million procedures / year, €5 billion in value), with this device, which tip can be modified on-demand as opposed to current passive catheters which preformed curve is unchangeable. First commercialisation is planned by 2019, with a first focus on the EU area, to be addressed globally as soon as the EC marking is obtained.
A first version (mono-curve) of BCV active catheter has been developed and validated and the upgraded version of the device (multi-curve) is currently in development and will be achieved by the end of 2017. In this frame, the MULTICURVE SME Instrument project aims at optimally preparing future innovation steps, with three specific objectives for phase 1: refining the current market strategy, preparing regulatory markings and preparing the planned multicentric, transnational clinical study to be performed in phase 2.
As such, the SME Instrument support will facilitate reaching the market of endovascular procedures, the multi-curve device being an unprecedented solution for medical practitioners. Indeed, for the first time, they should benefit from a catheter able to adjust to all patients’ individual anatomical variations, thus fully fitting within the personalised medicine concept.
Dziedzina nauki
Program(-y)
- H2020-EU.2.1.2. - INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies – Nanotechnologies Main Programme
- H2020-EU.2.1.5. - INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Advanced manufacturing and processing
- H2020-EU.2.1.3. - INDUSTRIAL LEADERSHIP - Leadership in enabling and industrial technologies - Advanced materials
- H2020-EU.2.3.1. - Mainstreaming SME support, especially through a dedicated instrument
Zaproszenie do składania wniosków
Zobacz inne projekty w ramach tego zaproszeniaSzczegółowe działanie
H2020-SMEINST-1-2016-2017
System finansowania
SME-1 - SME instrument phase 1Koordynator
51100 REIMS
Francja
Organizacja określiła się jako MŚP (firma z sektora małych i średnich przedsiębiorstw) w czasie podpisania umowy o grant.