Rezultaty
The data management plan describes the data that will be collected during the project and how the data will be made available for later use by other researchers. The main source of data considered in the project will be raw ultrasonic scanning data and ground truth information (where available).
This deliverable will consist of a demonstration of the scanning of a full-scale component (within the limits of the robot’s kinematics and other physical constraints) and a report of the detection results achieved during these scanning processes.
Plan for the Communication and Dissemination of resultsThis deliverable will contain an initial report about dissemination, communication including a description of the project's web page.
Publikacje
Autorzy:
Schlachter Klaus; Zambal Sebastian; Eitzinger Christian; Bulavinov Andrey; Pinchuk Roman
Opublikowane w:
SAMPE Europe Conference Proceedings, Numer 1, 2020
Wydawca:
Society for the Advancement of Material and Process Engineering
DOI:
10.5281/zenodo.4301957
Autorzy:
Klaus Schlachter, Sebastian Zambal, Christian Eitzinger, Andrey Bulavinov, Roman Pinchuk
Opublikowane w:
ZfP-Zeitung, Numer 170th edition (July 2020; frequency: four editions per year), 2020, Strona(/y) page 33, ISSN 1616-069X
Wydawca:
Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V. (DGZfP), Österreichische Gesellschaft für Zerstörungsfreie Prüfung (ÖGfZP) and Schweizerische Gesellschaft für Zerstörungsfreie Prüfung (SGZP)
DOI:
10.5281/zenodo.4304332
Autorzy:
Kastor Felsner, Klaus Schlachter, Sebastian Zambal
Opublikowane w:
Applied Sciences, Special Numer Control and Motion Planning in Industrial Applications, 2021, ISSN 2076-3417
Wydawca:
MDPI
DOI:
10.5281/zenodo.5720196
Wyszukiwanie danych OpenAIRE...
Podczas wyszukiwania danych OpenAIRE wystąpił błąd
Brak wyników