CORDIS oferuje możliwość skorzystania z odnośników do publicznie dostępnych publikacji i rezultatów projektów realizowanych w ramach programów ramowych HORYZONT.
Odnośniki do rezultatów i publikacji związanych z poszczególnymi projektami 7PR, a także odnośniki do niektórych konkretnych kategorii wyników, takich jak zbiory danych i oprogramowanie, są dynamicznie pobierane z systemu OpenAIRE .
Rezultaty
The DMP outlines what data will be generated and collected, the used methodology and standards for data collection and describes how the research data is made available during the project as well as preserved after completion of the project.Linked to Task 8.2
The plan will contain the following elements 1 identification of specific target groups and a mapping of key stakeholders at EU and at national level for project outreach and dissemination 2 the initial key messages and information relevant for each target group 3 the tools and channels that will be used to convey the messages and the information to each target group 4 schedule of activities until M18Linked to Task 82
Production report of 200 L reference-quality HPO (odnośnik otworzy się w nowym oknie)Production report of 200 L reference-quality HPO, describing the used feedstock, the applied operating conditions and final product specifications based on analysis results.Linked to Task 2.1
Dissemination, Exploitation and Communication plan 2 (odnośnik otworzy się w nowym oknie)Revision of the original plan, updating the schedule of activities until M36Linked to Task 8.2
Operating parameters combustor (odnośnik otworzy się w nowym oknie)The first step in the development of the combustor is to characterize operating parameters and requirements eg fuel and air supply operating pressure relevant temperatures These parameters will be documented and regularly updated based on the gained experience of the system Deliverable is linked to task 31Linked to Task 31
Report on 4 use case definitions for system development and evaluations (odnośnik otworzy się w nowym oknie)Report on 4 use case definitions for system development and evaluations: At least 4 use cases will be defined (heating and/or cooling demands, climate zone, building types), which will then be used for system development and evaluation of potential.Linked to Task 5.1
Publikacje
Autorzy:
Ali Baghernejad, Danish Rehman, Michel Delanaye, Ward De Paepe
Opublikowane w:
Volume 5: Cycle Innovations, 2024
Wydawca:
American Society of Mechanical Engineers
DOI:
10.1115/GT2024-128549
Autorzy:
Delanaye, M., Rehman D, Bjorn Aaen S, Lokke S, Leijenhorst E, Van de Beld B, Korteweg H, Tudoroiu A, Baghernejead A, De Paepe W, Hermann R, Nonnen T, Velte A, Fuldner G, Ramaswamy S, Harboe-Minwegen S, Ridolfi T, Capaccioli S
Opublikowane w:
European Biomass Conference and Exhibition Proceedings, 2023, ISSN 2282-5819
Wydawca:
ETA Florence Renewable Energies
DOI:
10.5071/31STEUBCE2023-3CV.4.10
Autorzy:
Aggelos Gaitanis; Francesco Contino; Ward De Paepe
Opublikowane w:
Energy, 2025, ISSN 1873-6785
Wydawca:
Elsevier
DOI:
10.2139/SSRN.5087255
Wyszukiwanie danych OpenAIRE...
Podczas wyszukiwania danych OpenAIRE wystąpił błąd
Brak wyników