Opis projektu
Nowy model do symulacji kotłów na biomasę
Kotły na paliwa kopalne są nieefektywne, emitują zanieczyszczenia w postaci gazów i cząstek stałych, a także posiadają inne wady, takie jak wydzielanie zanieczyszczeń, zażużlenie i korozja. Ponieważ biopaliwa stają się coraz bardziej powszechne, kotły na biopaliwa będą musiały sprostać wyzwaniom, przed którymi stoją kotły na paliwa kopalne. Jednocześnie muszą być one wystarczająco elastyczne, aby można je było dostosować do zapotrzebowania na moc i do różnych rodzajów biomasy. W ramach finansowanego przez UE projektu DT4BIOMASS opracowywany jest komputerowy model kotła na biomasę, który lepiej nadaje się do symulacji dowolnego urządzenia tego typu. Symulacje pomogą operatorom elektrowni wykorzystujących biomasę w łatwiejszym wdrożeniu tej technologii. Aby móc wykonywać modele dowolnych części kotła na biomasę, naukowcy zastosowali złożone techniki symulacyjne.
Cel
Future biomass boilers face the following challenges in the next years: the improvement of efficiency, the reduction of gaseous pollutant emissions (NOx, CO, HCl and SO2), the reduction of particulate matter emissions, mitigation of problems (fouling, slagging, corrosion) caused by ash deposits formation, flexibility to use different biomass fuels and to adapt to the power demand (start-up time, ramp rates, reducing minimum load). Since the important growth which is expected for this sector in the short/medium term, the enhancement of biomass boilers is becoming more demanded.
The manufacturing companies of biomass boilers base their design process in their experience and trial-and-error approaches. Although a reasonable solution can be found with this methodology, it can be far from optimal. Therefore, the digitalization of their design processes is necessary to give a step forward in the biomass boilers design. Simulation models (based on Computational Fluid Dynamics) have been extensively used to improve the design and operation of fossil fuel boilers. However, the incorporation of these techniques to biomass boiler manufacturing companies is insufficient. The higher complexity of the biomass combustion modelling hinders the access to these techniques (higher cost and expertise required) for this industry sector.
In this project Nabladot S.L. aims to develop a comprehensive and accurate biomass boiler model which can be adapted easily to simulate any biomass boiler and, in this way, to overcome the barriers to incorporate this technology to biomass boilers manufacturing/operator companies. Nabladot S.L. has available models to simulate any part of a biomass boiler excepting the fixed bed (or grate), which require the application of complex simulation techniques such as the Extended Discrete Element Method. To achieve this, NablaDot, S.L. proposes this project in which is requested the recruitment of an innovation associate (IA) with expertise in XDEM techniques.
Dziedzina nauki
Program(-y)
Zaproszenie do składania wniosków
Zobacz inne projekty w ramach tego zaproszeniaSzczegółowe działanie
H2020-INNOSUP-2019-02
System finansowania
CSA - Coordination and support actionKoordynator
50018 ZARAGOZA
Hiszpania
Organizacja określiła się jako MŚP (firma z sektora małych i średnich przedsiębiorstw) w czasie podpisania umowy o grant.