Skip to main content
Przejdź do strony domowej Komisji Europejskiej (odnośnik otworzy się w nowym oknie)
polski polski
CORDIS - Wyniki badań wspieranych przez UE
CORDIS
Zawartość zarchiwizowana w dniu 2023-01-02

Recycling of off-gases dusts coming from metallurgical procedures for FeNi production

Cel

The project is aiming at the recycling of more than 1 000 000 tons of dust coming from rotary kilns gases produced during the procedure for the production of ferronickel out of lateritic ore. The expected results will be the upgrading of environment, the economical benefits on the procedure and energy savings due to the incorporated in the dust carbon.

The project aims at the recycling of more than 1 000 000 tons of dust coming from rotary kiln gases produced during the procedure of ferronickel production from lateritic ore. This quantity of dust has been accumulated due to the insufficiency of the techniques in the past for dust recycling. The recycling will be achieved by dust introduction in the existing pelletising system through suitable arrangement of equipments (crusher, sieve, belt conveyor, silos).

The expected results will be the upgrading of the environment, the economical benefits on the procedure and the energy saving due to the carbon content of the dust.

Moreover recycling of the agglomerated pelletized material (due to Portland cement content) during the curing time will be achieved. So, pellets unsuitable for feed will not be stored.

Finally the continuous operation of the semi-industrial sintering machine will be started up. Through it, an independent way for dust recycling will be in operation at the extra benefit of by-passing the rotary kilns and therefore relieving the burden of today's dust pneumatic transportation equipment given that the sintered product will be fed into the electric furnaces. For this purpose, an installation for mixture preparation to be processed as well as one for sintered product handling will be necessary.

By this combined way there will be a solution to the problem of the continous dust recycling, on a permanent basis, with the environment being charged no more under any circumstances.

Program(-y)

Wieloletnie programy finansowania, które określają priorytety Unii Europejskiej w obszarach badań naukowych i innowacji.

Temat(-y)

Zaproszenia do składania wniosków dzielą się na tematy. Każdy temat określa wybrany obszar lub wybrane zagadnienie, których powinny dotyczyć wnioski składane przez wnioskodawców. Opis tematu obejmuje jego szczegółowy zakres i oczekiwane oddziaływanie finansowanego projektu.

Zaproszenie do składania wniosków

Procedura zapraszania wnioskodawców do składania wniosków projektowych w celu uzyskania finansowania ze środków Unii Europejskiej.

Brak dostępnych danych

System finansowania

Program finansowania (lub „rodzaj działania”) realizowany w ramach programu o wspólnych cechach. Określa zakres finansowania, stawkę zwrotu kosztów, szczegółowe kryteria oceny kwalifikowalności kosztów w celu ich finansowania oraz stosowanie uproszczonych form rozliczania kosztów, takich jak rozliczanie ryczałtowe.

DEM - Demonstration contracts

Koordynator

G.M.M. S.A. Larco
Wkład UE
Brak danych
Adres
20, Amalias Ave. & 5, Souri Street
10557 ATHENS
Grecja

Zobacz na mapie

Koszt całkowity

Ogół kosztów poniesionych przez organizację w związku z uczestnictwem w projekcie. Obejmuje koszty bezpośrednie i pośrednie. Kwota stanowi część całkowitego budżetu projektu.

Brak danych
Moja broszura 0 0