Skip to main content

Sustainable Smart Mobile Devices Lifecycles through Advanced Re-design, Reliability, and Re-use and Remanufacturing Technologies

Rezultaty

Solid state memory data erasure: Guidance

D5.2 is the outcome of Task 5.2

Design for Disassembly Guidelines

D 7.4 is the final outcome from Task 7.4, is an input to the policy activities in WP 8.

Product repair guides

D 7.6 is the final outcome of Task 7.6 and is closely aligned with the product developments in WP 1.

D4R tablet: Fab Lab production model

D1.4 is the outcome of Task 1.7, and will be aligned with the findings of Task 6.3 (business model)

Policy Analysis: Summary of recommendations

Compilation of policy briefs and input provided to standardisation activities

Disassembly studies

D 7.1 is the outcome from Task 7.1 and will provide guidance for technology developments in WPs 1-5.

Disassembly equipment: Technology demonstration

D3.2 is the outcome of Task 3.3, and will be the point of reference for the final economic and environmental assessments in WP 7

Reparability Score: Validation and tool implementation

D 7.5 is the final outcome of Task 7.5.

Device with reused components: Technology demonstration

D4.3 is the outcome of Task 4.3, and will be the point of reference for the final economic and environmental assessments in WP 7

Aligning, sorting and handling equipment: Technology demonstration

D3.1 is the outcome of Task 3.2, and will be the point of reference for the final economic and environmental assessments in WP 7

D4R tablet: Pilot batch (30 units)

D1.9 is one of the outcomes of Task 1.7 and comprises physical units of tablets produced as a small batch

Remanufactured packaged semiconductors: Technology validation

D4.2 is the outcome of Task 4.2, will be the input for Task 4.3 and will be the point of reference for the final economic and environmental assessments in WP 7

D4R tablet: Concept and technology validation

D1.3 is the outcome of Task 1.6, and will be the input for Task 1.7

Dissemination events

3 dissemination events Europe wide organized and handouts available

Blog posts compilation

Compilation of 14 blog posts released over the project lifetime.

Publikacje

Mobile Hydrometallurgy to recover rare and precious metals from WEEE

Autorzy: Bernd Kopacek
Opublikowane w: European Rare Earth Resources Conference - ERES2017, Issue May 29-31,2017, 2017

Recovery of precious and critical metals as a service

Autorzy: Bernd Kopacek
Opublikowane w: CRETE2018 - 6th International Conference on Industrial and Hazardous Waste, Issue September 4-7, 2018, 2018

MOBILE HYDROMETALLURGY TO RECOVER RARE AND PRECIOUS METALS FROM WEEE

Autorzy: Bernd Kopacek
Opublikowane w: SUM 2018 - Fourth Symposium on Urban Mining and Circular Economy, Issue May 21-23, 2018, 2018

Developing a Reparability Indicator for Electronic Products

Autorzy: Bas Flipsen, Conny Bakker, Guus van Bohemen
Opublikowane w: Electronics Goes Green 2016+, Issue September 7-9, 2016, 2016

Using machine learning to empower automation within reverse logistics

Autorzy: Johanna Reimers
Opublikowane w: Circular Materials Conference, Issue March 7-8, 2018, 2018

Investigations of temperature resistance of memory BGA components during multi-reflow processes for Circular Economy applications

Autorzy: Janusz Sitek, Marek Koscielski, Piotr Dawidowicz, Piotr Ciszewski, Mariia Khramova, Duc Nguyen Quang, Sergio Martinez
Opublikowane w: 2017 21st European Microelectronics and Packaging Conference (EMPC) & Exhibition, 2017, Page(s) 1-7
DOI: 10.23919/EMPC.2017.8346853

Recycling as a Service - a New Business Model to Recover Critical and Precious Metals from Industrial Wastes

Autorzy: Bernd Kopacek
Opublikowane w: 5th International Conference on Serviceology, Issue July 12-14, 2017, 2017

INTELLIGENT DISASSEMBLY OF COMPENENTS FROM PRINTED CIRCUIT BOARDS TO ENABLE RE-USE AND MORE EFFICIENT RECOVERY OF CRITICAL METALS

Autorzy: Bernd Kopacek
Opublikowane w: PLATE 2017 - Product Lifetimes And The Environment, Issue November 8-10, 2017, 2017

Modular Smartphones: Design Strategies Driven by Life Cycle Assessment Evidence

Autorzy: Karsten Schischke, Marina Proske, Miquel Ballester Salvà, Laura Gerritsen, Nikolai Richter, Nils F. Nissen, Klaus‐Dieter Lang, Christian Clemm
Opublikowane w: 8th International Conference on Life Cycle Management, 2017

Product Design Features of Mobile Devices for Extended Product Life: Modularity as an Approach for Better Reparability, Upgradeability and Customization

Autorzy: Karsten Schischke
Opublikowane w: The Ecodesign Directive in a changing policy climate: challenges & opportunities, Issue January 25, 2018, 2018

Modular products: Smartphone design from a circular economy perspective

Autorzy: Karsten Schischke, Marina Proske, Nils F. Nissen, Klaus-Dieter Lang
Opublikowane w: 2016 Electronics Goes Green 2016+ (EGG), Issue September 7-9, 2016, 2016, Page(s) 1-8
DOI: 10.1109/EGG.2016.7829810

Challenges of reuse and remanufacturing of modern chips in smart mobile devices

Autorzy: Sitek Janusz, Koscielski Marek, Arazna Aneta, Steplewski Wojciech, Janeczek Kamil
Opublikowane w: 2016 Electronics Goes Green 2016+ (EGG), Issue September 7-9, 2016, 2016, Page(s) 1-7
DOI: 10.1109/EGG.2016.7829846

Analytics of Technology Endowment Making Business Ecosystems, Closing-the-Loop Chain Networks and Systemic Products Domains

Autorzy: Slowak, André P.; Regenfelder, Max; Manessis, Dionysios
Opublikowane w: Proceedings of Management of Technologies - Step to Sustainable Production (MOTSP) 2016, Issue 2016, 2016

Achieving ‘Sustainable Smart Mobile Devices Lifecycles Through Advanced Re-design, Reliability, and Re-use and Remanufacturing Technology’

Autorzy: Regenfelder, Max; Schischke, Karsten; Ebelt, Stefan; Slowak, André P.
Opublikowane w: Proceedings of Management of Technologies - Step to Sustainable Production (MOTSP) 2016, Issue 2016, 2016

Closed-loop innovation for mobile electronics - the business model innovation approach of the sustainablySMART project

Autorzy: Max Regenfelder, Andre P. Slowak, Alejandro Santacreu
Opublikowane w: 2016 Electronics Goes Green 2016+ (EGG), Issue September 7-9, 2016, 2016, Page(s) 1-6
DOI: 10.1109/EGG.2016.7829847

Re-design of a digital voice recorder to meet the needs of circular economy — Status analysis

Autorzy: Rainer Pamminger, Stefan Kuso, Wolfgang Wimmer, Gerhard Podhardsky
Opublikowane w: 2016 Electronics Goes Green 2016+ (EGG), Issue September 7-9, 2016, 2016, Page(s) 1-9
DOI: 10.1109/EGG.2016.7829815

Experimental results of lithium polymer batteries ageing

Autorzy: Krystan Marquardt
Opublikowane w: Entwicklerforum Batterien & Ladekonzepte, Issue February 15-16, 2017, 2017

Modularity Meets Circular Economy - Environmental Gains of Emerging Designs for Smartphones and Tablets

Autorzy: Karsten Schischke
Opublikowane w: Emerging Green 2015, Issue Sept 22-24, 2015, 2015

Implications of Circular Economy on Users Data Privacy: A Case Study on Android Smartphones Second-Hand Market

Autorzy: D. Nguyen, S. Martinez, M. Khramova, Blancco, FI
Opublikowane w: Going Green - CARE INNOVATION 2018, 2018

Automated Identification and Sorting of Collected Smartphones

Autorzy: J. Reimers, Refind Technologies, SE
Opublikowane w: Going Green - CARE INNOVATION 2018, 2018

Getting the Balance Right between Circular Design and the Footprint of Modularity Materials for Smart Mobile Devices

Autorzy: Karsten Schischke, Marina Proske, Nils F. Nissen, Klaus-Dieter Lang
Opublikowane w: MRS Spring Meeting 2019, Symposium ES13: Materials Selection and Design—A Tool to Enable Sustainable Materials Development and a Reduced Materials Footprint, Issue April 22-26, 2019, 2019

Battery Health in a Circular Economy: Embedding an Ageing Model in the Smart Battery System

Autorzy: C. Clemm, K. Marquardt, N. Dethlefs, K. Schischke, R. Hahn, N. Nissen, Fraunhofer IZM, DE K. Lang, TU Berlin, DE
Opublikowane w: Going Green - CARE INNOVATION 2018, 2018

Designing an iameco D4R Tablet for Fab-Lab Level Production

Autorzy: J. Ospina, P. Maher, A. Galligan, MicroPro, IE, J. Gallagher, D. O’Donovan, GMIT Letterfrack, IE, G. Kast, ReUse, DE, K. Schischke, Fraunhofer IZM, DE
Opublikowane w: Going Green - CARE INNOVATION 2018, 2018

Analysis of data remanence after Factory Reset, and sophisticated attacks on memory chips

Autorzy: M. Khramova, S. Martinez, Blancco, FI
Opublikowane w: Going Green - CARE INNOVATION 2018, 2018

New Business Models for Circular Economy

Autorzy: M. Regenfelder, ReUse, DE R. Pamminger, TU Wien, AT
Opublikowane w: Going Green - CARE INNOVATION 2018, 2018

The Life Cycle of Smart Devices in 2030: The Effect of Technology Trends and Circular Economy Drivers on Future Products

Autorzy: Karsten Schischke, Nils F. Nissen, Klaus-Dieter Lang
Opublikowane w: Sustainable Innovation 2019, 22nd International Conference, Road to 2030: Sustainability, Business Models, Innovation and Design, Issue March 4-5, 2019, 2019, Page(s) 179-187

Modularization of Printed Circuit Boards through embedding technology and the Influence of highly integrated modules on the product carbon footprint of electronic systems

Autorzy: T. Kupka, G. Schulz, T. Krivec, AT&S, AT W. Wimmer, Vienna University of Technology, AT
Opublikowane w: Going Green - CARE INNOVATION 2018, 2018

Let´s Fix the Scoring of Reparability

Autorzy: B. Flipsen, M. Huisken, iFixit, DE
Opublikowane w: Going Green - CARE INNOVATION 2018, 2018

Desoldering and remanufacturing of semiconductor components from electronic mobile devices

Autorzy: J. Sitek, M. Koscielski, A. Arazna, K. Janeczek, W. Steplewski, Tele and Radio Research Institute, PL P. Ciszewski, P. Dawidowicz, Semicon, PL G. Podhradsky, Speech Processing Solutions, AT R. Ambrosch, Pro Automation, AT
Opublikowane w: Going Green - CARE INNOVATION 2018, 2018

Automation of Smartphone Disassembly: Collaborative Approach

Autorzy: R. Ambrosch, E. Ambrosch, Pro Automation, AT R. Pamminger, S. Glaser, Vienna University of Technology, AT M. Regenfelder, ReUse, DE
Opublikowane w: Going Green - CARE INNOVATION 2018, 2018

Guideline development to design modular products that meet the needs of Circular Economy

Autorzy: R. Pamminger, S. Glaser, W. Wimmer, Vienna University of Technology, AT G. Podhradsky, Speech Processing Solutions, AT
Opublikowane w: Going Green - CARE INNOVATION 2018, 2018

The Sustainability Connection for Mobile Electronics

Autorzy: B. May, A. Santacreu, Circular Devices, FI N. Nissen, K. Schischke, Fraunhofer IZM, DE K. Lang, TU Berlin, DE
Opublikowane w: Going Green - CARE INNOVATION 2018, 2018

Strategies for more Circularity in the Life Cycle of Mobile Information Technology

Autorzy: K. Schischke, M. Proske, J. Reinhold, Fraunhofer IZM, DE, M. Ballester, Fairphone, NL, K. Lang, TU Berlin, DE, M. Regenfelder, ReUse, DE
Opublikowane w: Going Green - CARE INNOVATION 2018, 2018

Technology Assessment of Wireless Charging using Life Cycle Tools

Autorzy: D. Sánchez, K. Schischke, N. Nissen, Fraunhofer IZM, DE K. Lang, TU Berlin, DE
Opublikowane w: Going Green - CARE INNOVATION 2018, 2018

Embedding as a key Board-Level Technology for Modularization and Circular Design of Smart Mobile Products: Environmental Assessment

Autorzy: Karsten Schischke, Martin Schneider-Ramelow, Klaus-Dieter Lang, Dionysios Manessis, Jakub Pawlikowski, Tobias Kupka, Thomas Krivec, Rainer Pamminger, Sebastian Glaser, Gerhard Podhradsky, Nils F. Nissen
Opublikowane w: 2019 22nd European Microelectronics and Packaging Conference & Exhibition (EMPC), 2019, Page(s) 1-8
DOI: 10.23919/empc44848.2019.8951816

The “Environmental Activation Energy” of Modularity and Conditions for an Environmental Payback

Autorzy: Karsten Schischke, Marina Proske, Rainer Pamminger, Sebastian Glaser, Nils F. Nissen, Martin Schneider-Ramelow
Opublikowane w: Life Cycle Management Conference, 2019, Poznan, Issue Sep.19, 2019

"""I’LL BE BACK – MODELLING of DIFFERENT CIRCULAR END-OF-USE SCENARIOS for SMARTPHONES"""

Autorzy: Dr. Rainer Pamminger, Sebastian Glaser, Prof. Dr. Wolfgang Wimmer, Karsten Schischke, Marina Proske
Opublikowane w: Life Cycle Management Conference, 2019, Poznan, Issue Sep.19, 2019

Recovery of valuable BGA components from used electronic mobile devices and their application in new electronic products.

Autorzy: Marek Koscielski, Janusz Sitek, Piotr Ciszewski, Piotr Dawidowicz, Aneta Arazna, Kamil Janeczek, Wojciech Steplewski, Gerhard Podhradsky, Roland Ambrosch
Opublikowane w: 2019 22nd European Microelectronics and Packaging Conference & Exhibition (EMPC), 2019, Page(s) 1-5
DOI: 10.23919/empc44848.2019.8951884

Recyclability of Tungsten, Tantalum and Neodymium from Smartphones

Autorzy: Nils F. Nissen, Julia Reinhold, Karsten Schischke, Klaus-Dieter-Lang
Opublikowane w: Proceedings of 11th International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign2019), Issue Nov 25-27, 2019, 2019

UPSCALING of COLLABORATIVE DISASSEM-BLY LINES for MOBILE PHONES – ECONOMIC and ENVIRONMENTAL CONSIDERATIONS

Autorzy: R. Pamminger, S. Glaser, R. Ambrosch, M. Genner
Opublikowane w: International Symposium for Production and Research, 2019, Vienna, 2019

Lifetime Extension by Design and a Fab Lab Level Digital Manufacturing Strategy: Tablet Case Study

Autorzy: J. Ospina, P. Maher, A. Galligan, MicroPro J. Gallagher, D. O’Donovan,GMIT Letterfrack; St. Knorr, Designing Berlin K. Schischke, Fraunhofer IZM
Opublikowane w: PLATE 2019 - Product Lifetimes And The Environment, Issue Sep.19, 2019

Embedding Technologies for the Manufacturing of Advanced Miniaturised Modules toward the Realisation of Compact and Environmentally Friendly Electronic Devices

Autorzy: D. Manessis, K-D. Lang, K. Schischke, J. Pawlikowski, T. Krivec, G. Schulz, G. Podhradsky, R. Aschenbrenner, M. Schneider-Ramelow, A. Ostmann
Opublikowane w: 2019 22nd European Microelectronics and Packaging Conference & Exhibition (EMPC), 2019, Page(s) 1-8
DOI: 10.23919/empc44848.2019.8951790

Assessment of the environmental performance of standard printed circuit board production and embedded component packaging at AT&S, Leoben

Autorzy: Tobias Kupka
Opublikowane w: 2018

Characterization and modelling of the cure induced shrinkage of epoxy resin used in organic based electronic modules

Autorzy: Julia Verena Zündel
Opublikowane w: 2018

Possible framework for the reuse of smartphones

Autorzy: Octavian Graf Pilati
Opublikowane w: 2018

Systemowy odzysk elementów elektronicznych - aspekt ekologiczny

Autorzy: Piotr Dawidowicz, Piotr Ciszewski (Semicon)
Opublikowane w: Elektronik, Issue 10/2016, 2016, Page(s) 2

Semicon oraz ITR w projekcie w ramach Horyzontu 2020

Autorzy: Piotr Ciszewski
Opublikowane w: EVERTIQ, Issue 04.11.2015, 2015

Drugie życie pamięci flash

Autorzy: Piotr Ciszewski
Opublikowane w: EVERTIQ, Issue 17.11.2015, 2015

Elementy zrównoważonego rozwoju produktów elektronicznych w gospodarce o obiegu zamkniętym

Autorzy: Janusz Sitek
Opublikowane w: ELEKTRONIKA - KONSTRUKCJE, TECHNOLOGIE, ZASTOSOWANIA, Issue 1/6, 2016, Page(s) 119-122, ISSN 0033-2089
DOI: 10.15199/13.2016.6.25

Impact of modularity as a circular design strategy on materials use for smart mobile devices

Autorzy: Karsten Schischke, Marina Proske, Nils F. Nissen, Martin Schneider-Ramelow
Opublikowane w: MRS Energy & Sustainability, Issue 6, 2019, ISSN 2329-2229
DOI: 10.1557/mre.2019.17

Writing the next chapter for optical sorting

Autorzy: Kristin Linnenkoper
Opublikowane w: Recycling International, Issue 10 times/year, 2016, Page(s) 32-33, ISSN 1387-8700